13 replies to this topic

[anark1]

Hi guys.

Whats the best spot to find a 600x280x76 core with 2.5" outlets ?
Most place stock the 600x300 but not the slightly smaller one.
Car is a 92 liberty rs

[Evil_VZ-T]

Ebay..

Or run a evo6 cooler;)

I ran it inverted in my B4

Having saying that i have a PWR core for sale

570x300x50 i think with 3" outlets..

[anark1]

Yeah planning on inverting mine :-)

[anark1]

what about getting one from here in 600 x 280 x 76 with 2.5" inlets/outlets
http://racingevoluti....-universal-fit

[Grant]

Looks the goods man

Bit pricey for just the core though...why don't you just get one of Billsy's kits?

[anark1]

Am wanting to dump the purchase on the credit card.
Im doubtfull billsy would take card lol

[Grant]

Haha fair enough

[anark1]

Found now i need to start thinking bout pipes.

[anark1]

just wanting peoples opinions on this before i get the parts.

a> is it a preferred option to use tbolt clamps on each join of the system rather then worm clamps?

b> with the silicon joiners, is there a benefit to getting the ones with the hump compared to just a straight joiner?

[Evil_VZ-T]

T bolt are heaps better

I used normal silicon but welded 3 little tabs on the end of each pipe

[anark1]

Would 2" pipes all round work ok?

[aekOne]

on an standard EJ20 2" should be fine all around. what turbo are you using? what other mods?

[Grant]

I've got 2" all round, works well

[anark1]

cheers guys will prolly go 2 hot and 2.5 cold

the reason i wanted go that bit smaller was maybe a little reponse increase and the fact i have a larger d34 optima in the way.

mods are v4 sti block, vf12 turbo (soon to be vf23) more mods to come, plan to get around in the 200kw area.

if 2.5 wont fit nicely in the cold area then ill drop it back to 2.