Hey guys i have a 1999 subaru outback auto and brought 2001 liberty sedan manual and just done a engine swap and mt conversion and have it all back together but have no injector pulse can anyone tell me wat could be wrong or how to fix it
no injector pulse after engine box and loom change
Started by xsnoise, Sep 22 2015 08:50 PM
5 replies to this topic
#2
cameron
-
- Members
-
- 786 posts
Regular Member
- Gender:Male
- Location:Wollongong
Posted 23 September 2015 - 05:12 AM
full loom swap? if not ecu needs to be tricked into thinking its in park/neutral
Have you put any more thought into squeezing some more power out of the engine. Like strapping on one of those intake fans
#3
RX25SE
-
- Members
-
- 12,751 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 23 September 2015 - 07:57 AM
Do you have battery voltage to one side of the injectors with ignition on?
If I told you I was a compulsive liar, would you believe me?
#4
xsnoise
-
- Members
-
- 12 posts
New Member
Posted 23 September 2015 - 08:26 AM
Full loom swap bar the abs side loom so it has the mt ecu and checked voltage at injectors and ecu and it stays a solid 12 v while cranking
#5
xsnoise
-
- Members
-
- 12 posts
New Member
Posted 23 September 2015 - 12:49 PM
All good guys figured it out needed to use the ign barrel and key as the keys are key coded and imobilisers the injectors
#6
RX25SE
-
- Members
-
- 12,751 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 23 September 2015 - 02:43 PM
Nice.
Always good when the fix is posted. 
If I told you I was a compulsive liar, would you believe me?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
