2 replies to this topic

[Glenn 20]

Hey Guys,
I have a 98 GC8 with 01Bugeye wiring/Ecu.
Trying to flash my Ecu with Ecuflash/tactrix cable.
I can read and copy my rom fine, but
I went flash it and there is no white plug under the dash, i have looked everywhere. only a green set(Test mode), black set, a single black plug and 2 single black wires with pins.I got 4.28volts Error,with only green ones in. Did a test flash and is said it was successful.
Does anyone happen to know which wires need to be joined?
See Attached Photo's.
Cheers

Attached Files

•  20160127_062106.jpg   106.44KB   3 downloads
•  20160127_171620.jpg   88.12KB   3 downloads

[Glenn 20]

I found out the cab wires inside are GC8 and not 01 bugeye. 

So will have to look at a way to wire it all up properly.

[StuG]

re:-Hi all,

Tactrix noob here. 

Bought new TACTRIX Openport 2.0 cable.

Have 2006 EJ25 Forester SOHC non-turbo.

I have FOUR (4) green plugs under dash.
 
Using ECUFLASH getting errors while trying to just read ROM.

Re these green plugs :- 
 


When do i connect them?



How many do i connect?

Do i need any other connectors?.

thanks in advance

Attached Files

•  20180109_164320.jpg   88.84KB   1 downloads