4 replies to this topic

[Deer_Hunter]

Hey guys, first post on here... getting a little desperate  . I'm in BC Canada and I'm overdue on changing my pads and rotors on my jdm b4. We don't have hardly any info on these cars over here and this seems to be the best place to look for part numbers for pads and rotors. If anyone can give me some numbers i would be grateful, thanks guys.

 

Applied model- BE5-B48D  VIN- BE5-040308

[duncanm]

check out a couple of manufacturer's sites for their catalogues - such as dba.com.au, bendix, etc.

 

AFAIK, Front pads and rotors are the same as the BH outback, rear pads are also the same, but the rotors differ (B4 is vented, outback solid) - so you may have more luck using that as a part number source if outbacks were sold locally.

 

Take the old pads into the shop just to double check.

 

Its australian, but http://www.superchea...rts-finder.aspx is a good source for part numbers

 

EDITED: If you're after rear rotors, I'd give these guys a call http://www.canadabrakes.com/ with the rear rotor specs (18 × 290 mm (0.71 × 11.42 in), vented).  There's probably another suby model that uses the same rotors, maybe the american Baja.

[Beckers]

H6 Outback should have B4 size brakes also.

[PeeKay]

Not  the most helpful advice but converting to WRX 4 pots will make your life a lot easier

[Shaz]

http://catalog.dbaus...ryID=ROTOR TYPE