Yeah I know, I bought an automatic so my wife can also drive the car, but honestly I hate auto's 😃 and I'm now secretly gathering parts to do the conversion. Anyone done one of these before? If someone on here was considering going from manual to automatic that would be sweet. Any help appreciated. I have found most of the gear available from a '94 model but not sure if everything will fit up.
Automatic to manual conversion
Started by carbonseals, Mar 19 2016 02:38 PM
5 replies to this topic
#1
Posted 19 March 2016 - 02:38 PM
#2
Posted 19 March 2016 - 05:05 PM
I have a 92 liberty wagon that was an NA auto originally. It has a 94 wrx driveline including manual 5 speed.
I was planning to tear it apart and see how it was done. Actually planned to swap the driveline into a cleaner gen 1 liberty wagon. But don't have the time.
I'd be looking for a guide. There must be something written up online.
I was planning to tear it apart and see how it was done. Actually planned to swap the driveline into a cleaner gen 1 liberty wagon. But don't have the time.
I'd be looking for a guide. There must be something written up online.
#4
Posted 19 March 2016 - 09:42 PM
I did do a conversion on a first gen RX7 some years back.... Doing this will be a bit more of a pain with the ecu stuff.
#5
Posted 26 March 2016 - 04:26 PM
If both donor and current are AWD, it's going to be easy, like 2 wires.. Rest is just remove refit.
ams: "Can't live with them, can't throw rocks at them."
#6
Posted 25 June 2016 - 08:28 PM
Found a 98 rex which could be a good donor vehicle, I think everything would be a straight swap over. The ecu might be the hurdle, will the manual ecu plug straight in? I think there may be some pin difference
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users