Jump to content


Photo

Electrical connector kits


  • Please log in to reply
1 reply to this topic

#1 93tzlegacy

93tzlegacy

    Regular Member

  • Members
  • PipPipPip
  • 1,470 posts

Posted 19 November 2016 - 12:19 PM

hey guys, 

I'm now stocking OEM connectors for Subaru ( as well as other models) , please see the list below : 

 

 

late Subaru coil connector set which includes the connector housing, pins, o rings , locking tabs and wire seals  ( 01 on WRX, gen 2 on legacy GTB , 01 on forester GT and Lib / Legacy H6  of 4 $60 posted ( can also pack as 6 connector set for $90 )

 

early Subaru 89-93 RS liberty / Legacy , 93-96 WRX coil connector plug and pin kit, these can be used to replace the oem connectors ( very common for the locking tab to break off) or can also be used to make conversion looms to use the late WRX coil packs 

$60 for a set of 4 

 

99 on Subaru 3 pin alternator connector, this connector is very common for the locking tab to break off, some heat affected connectors can also completely break and cause charging issues. The revised connector is grey not the original green. the kit comes with housing, locking tab, wiring seals and terminals. 

$15 for the kit ( one kit needed per car) 

 

generic 6 pin oem style connector set, male and female sides , ideal for replacing transmission connector in DCCD models as well as rear O2 connector in gen 3 H6, 

$15 for the full kit ( male and female housings, pins and wire sealing plugs)

 

generic 4 pin Oxygen sensor connector set, OEM Toyota spec housings

ideal for replacing melted oxygen sensor connectors , which can be a very common issue on Subaru models. 

$15 for the full kit ( male and female housings, pins and wire sealing plugs)

 

Deutsch connector sets also available, ideal for engine bay , external or under dash use , weatherproof when assembled correctly

 

2 pin connector set ( male and female housings, locking tabs, and pins)

$6

3 pin connector set ( male and female housings, locking tabs, and pins)

$8

4 pin connector set ( male and female housings, locking tabs, and pins)

$10

6 pin connector set ( male and female housings, locking tabs, and pins)

$13

8 pin connector set ( male and female housings, locking tabs, and pins)

$15

12 pin connector set ( male and female housings, locking tabs, and pins)

$18

 

 

all connectors in stock use open style crimping ont barrel style crimping so standard crimping pliers will be fine, meaning no hard to find crimping pliers are required. 

multi purchase discounts also available and postage Aus wide from $7.60. all items are in stock and ready to ship. 

thanks, 

Ben.

 

 

 


Benny's Custom Works supplying OEM new, aftermarket new and used parts at the best prices 

0415 522 512

wagonsyndicatesig.jpg


#2 motoboy76

motoboy76

    Regular Member

  • Members
  • PipPipPip
  • 689 posts
  • Gender:Male
  • Location:Newy.....
  • Interests:Subaru's, Dirt and road bikes......

Posted 20 November 2016 - 06:39 AM

Nice to know Bennie.....






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users