Hi all after adressing all my issues i have had i want to get a cold air intake. Just windering if anyone could set me in the right direction of one that will just bokt straight on without changing too much and one thats not too harsh on the wallet. Any help would be great thanks.
01 b4 air intake
Started by Dylan720, May 09 2017 02:55 AM
3 replies to this topic
#1
Posted 09 May 2017 - 02:55 AM
#2
Posted 09 May 2017 - 07:52 PM
No idea about CAIs but try this,
Take out the intake silencer. You have to pull out the black plastic behind the fender to access it. You need to remove some tabs. Just be careful not to bend or break anything. It can be a little hard to wriggle the silencer out. Put everything back and make sure your bumper is fitted firmly.
Block the hole where the intake funnel was and run a short pipe down into the fender. Otherwise the airbox still sucks some hot air from the engine bay.
I notice the intake is louder.
2017-04-17_09-29-41 by Jason, on Flickr
Take out the intake silencer. You have to pull out the black plastic behind the fender to access it. You need to remove some tabs. Just be careful not to bend or break anything. It can be a little hard to wriggle the silencer out. Put everything back and make sure your bumper is fitted firmly.
Block the hole where the intake funnel was and run a short pipe down into the fender. Otherwise the airbox still sucks some hot air from the engine bay.
I notice the intake is louder.
2017-04-17_09-29-41 by Jason, on Flickr
#3
Posted 09 May 2017 - 08:33 PM
Dont bother man. TT's work better with the standard intake. An airbox resonator delete like mentioned above and a good quality filter will do the job.
'04 Liberty GT Premium "The Sprog Chariot"
#4
Posted 11 May 2017 - 01:08 PM
good quality
genuine* They're like $40, just do it.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users