Where to place trolly jack
#1
Posted 21 July 2017 - 10:06 AM
When attempting to jack using the front tow hooks, the car does not get raised enough
The area in the red box is the pinch welds where the scissor jack is placed, I know this is where I place the jack stands, but can I use the areas to the side which are shown as a green box safely?
2017-07-20 12.16.31.jpg 36.41KB 9 downloads
I know shouldnt use the lower control arm as a jack point as it is a curved surface and as well as being a suspension component.
2017-07-20 12.15.31.jpg 74.42KB 9 downloads
#2
Posted 21 July 2017 - 10:19 AM
#3
Posted 21 July 2017 - 10:23 AM
Rear jack point is under the diff casing. Front point is a big metal plate behind the sump
#4
Posted 21 July 2017 - 10:59 AM
#5
Posted 21 July 2017 - 11:05 AM
Might have to jack up the car to jack up the car. Sills should be fine to jack up one side of the car in that case
#6
Posted 21 July 2017 - 11:25 AM
#7
Posted 21 July 2017 - 12:01 PM
I sometimes use the rear mount point for the front lower control arm.
#8
Posted 21 July 2017 - 04:53 PM
I sometimes use the rear mount point for the front lower control arm.
I take it you mean where this bolt is
2017-07-21 16.51.00.jpg 85.86KB 8 downloads
I saw this on the back in front of the rear tire, I take it it would be suitable
2017-07-21 17.07.37.jpg 56.87KB 8 downloads
#9
Posted 21 July 2017 - 08:04 PM
I'm sure that's plenty strong -- but be careful you don't munt any threads or bolt heads.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users