Jump to content


Photo

Need reliable trustworthy mechanic


  • Please log in to reply
3 replies to this topic

#1 Doddyz

Doddyz

    New Member

  • Members
  • Pip
  • 31 posts

Posted 08 April 2018 - 08:41 PM

HI guys I have a 2001 Subaru liberty b4 manual. Clutch is slipping really bad so I just bought a exedy Lightened Flywheel and a Mantic Stage 2 performance clutch.

 

Does anyone know a good trustworthy reliable mechanic who will do the job properly and better still done clutch swaps before. Preferably in the eastern suburbs as Im from Boronia but happy to travel up to 30kms.

 

Also anything else I should do while gearbox is out like rearmain seal or dont touch it if its not leaking?

 

Any help much appreciated.

 

Cheers

 

 



#2 Barbbachello

Barbbachello

    Touring Bruce

  • SubyClub Area Rep
  • PipPipPip
  • 6,449 posts
  • Gender:Male
  • Location:Mehico
  • Interests:Docking

Posted 09 April 2018 - 12:14 PM

HI guys I have a 2001 Subaru liberty b4 manual. Clutch is slipping really bad so I just bought a exedy Lightened Flywheel and a Mantic Stage 2 performance clutch.

 

Does anyone know a good trustworthy reliable mechanic who will do the job properly and better still done clutch swaps before. Preferably in the eastern suburbs as Im from Boronia but happy to travel up to 30kms.

 

Also anything else I should do while gearbox is out like rearmain seal or dont touch it if its not leaking?

 

Any help much appreciated.

 

Cheers

 

 

Assuming Boronia in Victoria HCW in blackburn are the ones to see


tIeW8DE.png


#3 Doddyz

Doddyz

    New Member

  • Members
  • Pip
  • 31 posts

Posted 09 April 2018 - 09:36 PM

If its con they have moved to Boxhill?

 

Looked them up today

 

Cheers will give him a ring and suss him out'



#4 El_Freddo

El_Freddo

    Rock'n the old Skool

  • Members
  • PipPipPip
  • 2,236 posts
  • Gender:Male
  • Location:Bridgewater/Central Vic/semi-retired nomad
  • Interests:Subarus, 4wd'n Subarus, travelling Subarus, Tinkering... I could go on!

Posted 10 April 2018 - 09:56 PM

Change rear main seal as a matter of course - you're already in there to do the clutch so remove the flywheel and swap in a new seal. Make sure you lube it up with some rubber grease ;)

Cheers

Bennie
"The lounge room is not a workshop..."
https://www.imageshack.us/i/po1BKrxbj
1BKrxb.jpg
El Freddo's Pics    -    El_Freddo's youtube




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users