GC8 Seat swap into 05/06/07 version WRX
#1
Posted 10 January 2011 - 10:32 AM
Just wondering if anyone can help me and have replaced their stock seats in a 06/07 version wrx with GC8 seats before and if you were able to swap them without any modifications? Like am i able to use the same rails etc?
Iv only had this car for the past 2 months and i cant say its looking very promising that i'll get used to this extremely bulged out lumber support in this model of wrx
#2
Posted 10 January 2011 - 10:58 AM
#3
Posted 10 January 2011 - 12:06 PM
#4
Posted 10 January 2011 - 12:28 PM
Trust me KNG-02L, you dont want these seats unless you want to be a parraplegic in 5 years...seriously, their that bad. LOL
#5
Posted 10 January 2011 - 12:40 PM
Where are you located? If you're nearish to Newcastle at all we could negotiate a swap
#6
Posted 10 January 2011 - 03:42 PM
as mentioned in your other thread you need to consider you are removing airbag equipped seats. you will also experience a fault light.
MY07 GT spec B
#7
Posted 10 January 2011 - 04:26 PM
i now have the newish 06 sti seats and they dont hold you near as much
but im used to them already and i dont think they are that bad, although when i first got the car i wanted to put bug sti seats in it
btw as alexxx said you will be getting rid of your airbags
#8
Posted 11 January 2011 - 08:47 PM
Are you sure about the airbags definately being in the standard 07 WRX? I dont think they are..i read somewhere if your seats had side airbags, you should have some tag on the side of the seat saying "SRS Airbag" or something similar, i couldnt seem to find anything when i looked
#9
Posted 11 January 2011 - 08:52 PM
Thanks for the reply's guys..seriously torn about these seats have had my heart set on one of these cars for atleast 5 years, finally get my full license and cant drive it for longer than 20 minutes...shattering lol.
Are you sure about the airbags definately being in the standard 07 WRX? I dont think they are..i read somewhere if your seats had side airbags, you should have some tag on the side of the seat saying "SRS Airbag" or something similar, i couldnt seem to find anything when i looked
yea, they have tags on the outside of the door side bolster. should also probably say it in your user manual
MY07 GT spec B
#10
Posted 12 January 2011 - 12:10 AM
Subyclub, The place where random internet weirdos become good mates
#11
Posted 12 January 2011 - 07:46 AM
What would you recommend??
2005 WRX JDM Seats
http://cgi.ebay.com....=item1c1869251f
2001 WRX STI Ver7 Seats
http://cgi.ebay.com....=item230d3b5117
GC WRX
http://cgi.ebay.com....=item33635968e9
Personally like the looks of the 01/05 blue/black style seats tho the end goal is to be able to drive for 20+ minutes not to have pretty seats
And would the JDM seats still be a straight swap? im guessing they would be different?
#12
Posted 12 January 2011 - 12:40 PM
#13
Posted 12 January 2011 - 03:12 PM
the 01 bug sti seats and the gc8 seats have the same hold pretty much,
if i was you id be ringing either the insurance company or an engineer about the airbag situation
and all the above will bolt in no problems, except the airbag situation
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users