Fitment of JDM bar onto ADM model
LPM_B4 22 May 2013
Hi
My brother crashed my old car recently not too bad, but enough to need a new bar
the car is a BE9 2001 MY02 Rx liberty
i have found this http://www.ebay.com....7&_uhb=1<br />and i am wondering if this bar is going to fit up without hassles the guy seems to think it will only fit BE5 which im guessing hes right.
im trying to source second hand, as subaru qouted close to $700 for an unpainted bar with 2 new foglight surrounds
this will be alot cheaper if it will fit. just thought i would ask on here to confirm before he blows the bank
hes hoping to rectify this damage before HVC
and if anyone else knows of a second hand one going within NSW that would be great he is located near port macquarie NSW.
cheers lachy
My brother crashed my old car recently not too bad, but enough to need a new bar
the car is a BE9 2001 MY02 Rx liberty
i have found this http://www.ebay.com....7&_uhb=1<br />and i am wondering if this bar is going to fit up without hassles the guy seems to think it will only fit BE5 which im guessing hes right.
im trying to source second hand, as subaru qouted close to $700 for an unpainted bar with 2 new foglight surrounds
this will be alot cheaper if it will fit. just thought i would ask on here to confirm before he blows the bank
hes hoping to rectify this damage before HVC
and if anyone else knows of a second hand one going within NSW that would be great he is located near port macquarie NSW.
cheers lachy
LPM_B4 23 May 2013
93tzlegacy 23 May 2013
we have a whole b4 RSK kit for $500 if you want it,
http://cgi.ebay.com....IT#ht_818wt_932
also be5/be9 are the same chassis, the 5 refers to 2.0 engine capacity, the 9 refers to 2.5, bee is H6 rs30. thanks, Ben
http://cgi.ebay.com....IT#ht_818wt_932
also be5/be9 are the same chassis, the 5 refers to 2.0 engine capacity, the 9 refers to 2.5, bee is H6 rs30. thanks, Ben
LPM_B4 23 May 2013
true
how much am i looking at for postage to 2446/2444 (Wauchope/Port Macquarie) and paint?
He only needs a front bar as this is all that was damaged in the accident hes only got 4 weeks until HVC thats what were trying to get it ready for the bar im looking at is located in newcastle so shipping would be a little cheaper but ill show him this.
we have a whole b4 RSK kit for $500 if you want it,
http://cgi.ebay.com....IT#ht_818wt_932
also be5/be9 are the same chassis, the 5 refers to 2.0 engine capacity, the 9 refers to 2.5, bee is H6 rs30. thanks, Ben
how much am i looking at for postage to 2446/2444 (Wauchope/Port Macquarie) and paint?
He only needs a front bar as this is all that was damaged in the accident hes only got 4 weeks until HVC thats what were trying to get it ready for the bar im looking at is located in newcastle so shipping would be a little cheaper but ill show him this.
Liberty 23 May 2013
I'd get the whole bodykit from ICHIban and sell the bits you don't use. Or keep them and get rid of them if you ever sell the car.
AussieTemplar 23 May 2013
we have a whole b4 RSK kit for $500 if you want it,
http://cgi.ebay.com....IT#ht_818wt_932
also be5/be9 are the same chassis, the 5 refers to 2.0 engine capacity, the 9 refers to 2.5, bee is H6 rs30. thanks, Ben
I would have killed for this when I had my Gen3!!!
(wouldn't have worked anyway cause it was a rev C )