Chubbs Black STI
#41
Posted 11 August 2014 - 07:11 PM
Some may know but I recently purchased a Td06sl2-20g with a 1 bar actuator. Well the turbo is on and just had a retune with matt over the weekend. Final result was 233kw safely. The power is unbelievable it puts a big smile on my face. Also had a cusco catch can installed too. All my work has been done by revzone and a big thanks to owen for his support and expert advice, I highly recommend them! Thanks to Matt and Vinny on the dyno and thanks to everyone else to has helped me out too
#42
Posted 11 August 2014 - 07:56 PM
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#46
Posted 28 December 2014 - 05:47 PM
Looking good man!
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#49
Posted 28 February 2015 - 08:03 AM
Just read this thread.
Wow was the first word that sprung to mind, followed by Faaaaark.
Nice car mate!
Also, what do you think of the AD08's?
If I told you I was a compulsive liar, would you believe me?
#50
Posted 28 February 2015 - 08:43 AM
The diffuser looks good mate. I heard they're a bit of a mission to install, did you have any issues?
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#51
Posted 15 November 2015 - 09:27 AM
Installed a few more goodies over the last few weeks. I installed an AVO catless stainless steel exhaust system with Equal Length headers.
Had the car retuned after the install with Matt and loving it. Making the same power on 18psi with 500rpm earlier spool than i was on 20psi with the old custom system.
Surprisingly quieter than my last exhaust when idleing but when i open it up it gives a nice crackle on gear changes and a loud pop after WOT.
#52
Posted 15 November 2015 - 08:48 PM
Hadn't seen this thread before. Amazing car Chubbs. Subscribed!
"Installation is the reverse of the removal procedure."
BH9 02-05 / BD9 07-14 / BE5 14-> / GGA 18->
2001 Legacy B4-RSK / 1999 ZX-9R C2
#54
Posted 26 April 2016 - 07:20 PM
Few exciting things coming along. I am slowly adding some cosmetic changes.
I was due for new brakes pads so i repainted my brembos as they were a little scratched by the previous owner. Had the calipers soda blasted then primed them with heat primer and went for a Lamborghini Orange with extra sparkles added to it. They look amazing in the sunlight.
I went with Project Mu HC800 pads front and rear with new shims and Endless brake fluid.
Once the new wheels go on i will post a pick of the brakes on. Stay tuned.
#55
Posted 26 April 2016 - 07:24 PM
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#56
Posted 26 April 2016 - 07:33 PM
And, what's happening with the old wheels?
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#57
Posted 26 April 2016 - 07:57 PM
#59
Posted 22 July 2016 - 08:23 PM
That looks forking mint!
Real nice. Can't wait to get my hands on some skirt action.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#60
Posted 10 September 2016 - 10:33 PM
Finally installed camber tops and the new wheels.
Enkei RS055R 18x9+40 with Advan AD08R 235/40.
Very happy with the fitment and the extra grip. Makes a big difference. Thanks to Owen, G88, Raceline and Import Monster.
Happy with how the car looks. The exterior is now finished. I do not want to go over the top i think less is more.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users