Future exterior mods include wind visors, coils and new rims as the enkie ones have been gutter rashed a lot (would probably be cheaper to buy a set gravels than get the enkies refurbed), Then just general fixing up of all the little things that annoy me like scratches, cloudy headlights, and some of the rubber seals are lifting. Interiors is going to be steam cleaned and a good protectant to save her from being destroyed by my kids. Apart from that, I havent really thought of much else to do to her.
louisa's 06 GT TBSTi
#1
Posted 16 April 2014 - 10:36 AM
Future exterior mods include wind visors, coils and new rims as the enkie ones have been gutter rashed a lot (would probably be cheaper to buy a set gravels than get the enkies refurbed), Then just general fixing up of all the little things that annoy me like scratches, cloudy headlights, and some of the rubber seals are lifting. Interiors is going to be steam cleaned and a good protectant to save her from being destroyed by my kids. Apart from that, I havent really thought of much else to do to her.
#2
Posted 16 April 2014 - 11:01 AM
Hi and nice ride!
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
#3
Posted 16 April 2014 - 11:05 AM
Welcome & very nice wagon.
#4
Posted 16 April 2014 - 11:57 AM
Nice.
Full refurb and repaint of the rims will only set you back $480 and you can change the color too.
OEM+
#5
Posted 16 April 2014 - 01:15 PM
I was gonna mention what Mark said. It'd be worthwhile getting them refurbed to be honest, and if you don't, I'm sure there'd be a mountain of people wanting to buy those Enkei's off you.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#6
Posted 16 April 2014 - 03:05 PM
Nice.
Full refurb and repaint of the rims will only set you back $480 and you can change the color too.
Oh really?? Hmmm that sounds better. I think I read somewhere that a company kinda close does it for about 200 per rim. But 480 is much nicer!!
I was gonna mention what Mark said. It'd be worthwhile getting them refurbed to be honest, and if you don't, I'm sure there'd be a mountain of people wanting to buy those Enkei's off you.
Yeah if I do go down the new rim path, the enkies will be staying in the family :-D
#7
Posted 16 April 2014 - 03:34 PM
I know of someone in Sydney that does it for aroudn the $200 mark per rim as well (may be even cheaper, you just have to fill in their form to get a free quote), they're probably the cheapest I've found around here to be honest. Definitely take Mark up on the offer if that's the path you decide to go down.
And that's good to hear. They're exceptionally good-looking rims.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#8
Posted 17 April 2014 - 02:31 PM
Sent from my GT-I9505 using Tapatalk
#9
Posted 19 April 2014 - 02:43 PM
Attached Files
#10
Posted 19 April 2014 - 03:13 PM
Started on my headlights today. Havent used a restoration kit, just cutting and polishing. Already looks better
Use that cut and polish on a Mothers Speed Cone
It's a red foamy attachment that goes on a cordless drill
Cuts it down to a fraction of the time
Also Meguires PlastiX is the best cutting agent for headlights and plastics
#11
Posted 19 April 2014 - 03:23 PM
Use that cut and polish on a Mothers Speed Cone
It's a red foamy attachment that goes on a cordless drill
Cuts it down to a fraction of the time
Also Meguires PlastiX is the best cutting agent for headlights and plastics
Thanks for the tips.
will be getting the meguires headlight kit soon. Going to do them properly when I pull them apart
#12
Posted 21 April 2014 - 11:03 PM
This weekend im going to try and clean up the marks and bugs from the front bar.
Attached Files
#13
Posted 21 April 2014 - 11:06 PM
Very nice touch ups. I do like the matte black grille, but I haven't got the guts to do it myself yet. I'm after a Corazon grille to replace it.
That lip...
It is one thing I'd love to get for my wagon.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#14
Posted 21 April 2014 - 11:13 PM
Very nice touch ups. I do like the matte black grille, but I haven't got the guts to do it myself yet. I'm after a Corazon grille to replace it.
That lip...
It is one thing I'd love to get for my wagon.
I love the look of the corazon's but dont think I can justify spending 500+ on one at the moment. Was going to use plasti dip onthe grill but couldnt get any on sat and I was impatient lol. I sprayed my gen1 grill and front bar so im pretty confident hehe.
Lips are awesome. Its not the original one though, just an ultrex one. Thinking of finding side lips or using that ezlip stuff from ebay. Having fun withthis car
#15
Posted 21 April 2014 - 11:22 PM
I can't justify that price either, although second-hand ones do pop up every now and then.
I'm all for the genuine lip. I know it's pricey but meh.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#16
Posted 21 April 2014 - 11:27 PM
Ive found a few corazons on import monster last week, but thats as far as I went....
#17
Posted 22 April 2014 - 08:13 AM
Plasti Welding,
Spray Painting
Plasti Dipping...
It's like music to my ears..!!
#18
Posted 03 May 2014 - 11:04 AM
Would like to black out my headlights in the next week or 2 and ive had a hunt though the forum and havent stumbled across anything (im on my tablet if that matters. If anyone knows the thread im after or has their own diy way of doing it, could you please sharw with me
Cheers all
#19
Posted 03 May 2014 - 12:38 PM
#20
Posted 03 May 2014 - 01:03 PM
Its a fairly universal process so any guide should work
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users