43 replies to this topic

[WillC]

Even if they do fit, I'm not too sure they would be up to the task. They are noticeably thinner. Smaller diameter.

You can try if you like.


Did you say @ HVC you had a B4 front O2/AFR sensor???

Yep, had check my build thread. I was saying my o2 was fine and didn't knock on wood  Popped a CEL on the way home, o2. I've used my replacement and will be buying another replacement from the UK. Did you want me to do a double order?

[WillC]

I'll pm you mate.

Sorry for the hijack Pat.

Oh yah Sorry Pat,

And if you're near the area Liverpool -  Wetherill Park/ Hoxton Park. I'll be willing to lend a hand on the weekend to help ya with the diff provided we have some beers involved. I've never done one though so don't quote me as anyone that knows what they are doing around the diff area Ahhahah

[patttyfox]

Oh yah Sorry Pat,
And if you're near the area Liverpool -  Wetherill Park/ Hoxton Park. I'll be willing to lend a hand on the weekend to help ya with the diff provided we have some beers involved. I've never done one though so don't quote me as anyone that knows what they are doing around the diff area Ahhahah

All good boys! and I'll PM you about it haha trying to sort a weekend when to do it

[patttyfox]

So I rang Ben and gave him the trans code and said that it is indeed a 4.44 rear diff, I've just got to double check the gearbox matches up and then find a bit of a how to guide for the diff

[FR34KO]

Would be keen to give you a hand pat. I want to up my experience in the field. Might even be able to get it on a hoist at my work out at padstow. they have forking 4 or 5 of them lol.

[patttyfox]

Would be keen to give you a hand pat. I want to up my experience in the field. Might even be able to get it on a hoist at my work out at padstow. they have forking 4 or 5 of them lol.

 

Hoist would be beyond ideal man!

[Start]

Here is from the Haynes manual basically as described above.. If shit pic ill scan it tommorrow

[Reevesy]

Also remove the studs from the diff and replace it with bolts. Makes much easier to install. And to pull out next time

[FR34KO]

Also remove the studs from the diff and replace it with bolts. Makes much easier to install. And to pull out next time

What size/part no. ? If you might know?

 

 

When do you think you might be doing it Pat? I'll ask when I can. And the guys there would be able to help us if we hit problems.

[patttyfox]

Picture is perfect man, appreciate that. I've got a gregorys book for my car kicking around at home too so may have a flick through that too. 

 

Ah champion Reevesy! Sounds like this isn't the first time that you've replaced a diff?

 

And Dan I don't know hey, I'd dare say within hopefully the next month so then its just done and I no longer have to worry about when the diff is gonna go since its the daily.

[WillC]

this is sounding heaps mad!!it'll be done in no time

[patttyfox]

Then once this is done, on to 4/2 pot conversion

[patttyfox]

Pattypatpat, your box is absolutely 4.44 if the diff is.

You'd forking know by now if it wasn't.

Click click Boooom in 20 seconds.

 

Bossbosskong so nothing else would handle the power?

[patttyfox]

Just tear each other to shreds?

[Jimbo]

Pretty much. 

I'm down for lending a hand aswell.

[patttyfox]

What size/part no. ? If you might know?
 
 
When do you think you might be doing it Pat? I'll ask when I can. And the guys there would be able to help us if we hit problems.

Id dare say in and around tax time? so realistically within the next month or so?

Pretty much. 

I'm down for lending a hand aswell.

Cheers man. Shall compensate all with beers and pizza