Finally got b4 rego'd and on the road..
Took round block for quick drive thus aarvo and noticed all sweet when driving normal but if give a hit and shift relatively fast accelerator seems to hesitate on returning to normal gearchange revs..
Once it felt like cable was stuck and reved at like 3500rpm till i took off exiting a rounabout and gearbox caught up and drove normal again..any ideas?
sticky accelator cable?
Started by claire6, May 15 2015 07:08 PM
5 replies to this topic
#1
Posted 15 May 2015 - 07:08 PM
#2
Posted 15 May 2015 - 07:09 PM
slipping clutch?
#3
Posted 15 May 2015 - 07:24 PM
No not clutch..
Definitely accelerator pedal or cable.
I know they hesitate from factory but this seems to stay to high for my liking..
Like cable caught and revs at 3500km without dropping even in neutral..
Definitely accelerator pedal or cable.
I know they hesitate from factory but this seems to stay to high for my liking..
Like cable caught and revs at 3500km without dropping even in neutral..
#4
Posted 17 May 2015 - 02:45 PM
Happened again this morning.
When cruising all good but if give it a bit and rev it out car wants to keep accelerating when cjanging gears..
Changed down to 2nd and dont have to touch accelerator pedal it drives itsrlf.
Then after 10 or so sec revs drop down to normal..
When cruising all good but if give it a bit and rev it out car wants to keep accelerating when cjanging gears..
Changed down to 2nd and dont have to touch accelerator pedal it drives itsrlf.
Then after 10 or so sec revs drop down to normal..
#5
Posted 17 May 2015 - 02:49 PM
Iacv sticky?
#6
Posted 17 May 2015 - 03:13 PM
Have someone watch the throttle body as you rev it?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users