Gents,
Just need clarification on something.
Are the Gen3 turbo top and bottom radiator hoses identical to that found on the GD WRX?
From what I can tell, the top hose appears to be the same, though I'm not 100% sure on the bottom.
Radiator Hoses
#1
Posted 03 August 2015 - 08:52 PM
'04 Liberty GT Premium "The Sprog Chariot"
#2
Posted 03 August 2015 - 09:12 PM
I can't answer directly Jimbo but perhaps you could use this site to compare part numbers?
Or even download the Mackay hose catalogue and compare? (It will also give you the ID at each end of the hose.)
http://www.mackayrub....au/catalogues/
If I told you I was a compulsive liar, would you believe me?
#3 Guest_KONG_*
Posted 03 August 2015 - 10:25 PM
They fit Jimbo
#4
Posted 03 August 2015 - 10:26 PM
lol...
As in direct fit or trim-a-bit-here-contort-this-way-make-the-cubt-fit kind of fit?
'04 Liberty GT Premium "The Sprog Chariot"
#5 Guest_KONG_*
Posted 03 August 2015 - 10:39 PM
The silicone GD hoses on mine were a straight fit. No trimming required,
#6
Posted 03 August 2015 - 10:45 PM
Mad.
Thanks Boss!
I need to give you some cash for that zorst too, don't let me forgot
'04 Liberty GT Premium "The Sprog Chariot"
#7
Posted 04 August 2015 - 07:49 AM
... mmmm but numbers are different.
TT hose numbers match a Gen3 2.5NA top hose and GD WRX bottom hose.
4490 is the lib part - lengths slighty different and the lib has a extra bit of protection.
comparison.png 107.66KB 11 downloads
#8
Posted 06 August 2015 - 06:24 PM
#9
Posted 06 August 2015 - 06:29 PM
Here it is
#10
Posted 06 August 2015 - 09:47 PM
Ahkay. Which one is which? Gee, that's close to the PS pulley!
'04 Liberty GT Premium "The Sprog Chariot"
#11
Posted 11 August 2015 - 04:37 PM
yeah it was too close for my liking. I don't even think I ran the engine with the RX hose.
#12
Posted 11 August 2015 - 09:50 PM
Gen 3 RX is on the left and GD one is on the right.
yeah it was too close for my liking. I don't even think I ran the engine with the RX hose.
There is 2 different ones for a rx, both mackay ones are above, the longer one is longer in the section around the pulley so it sticks out more.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users