Does anyone know if the driveshafts fitted to a MY12' STI are the same as an 06' WRX's?
STI and WRX Driveshaft Interchangeability
Started by Badger1, Jun 02 2016 05:39 PM
2 replies to this topic
#1
Badger1
-
- Members
-
- 19 posts
New Member
- Gender:Male
- Location:Melbourne
- Interests:Hiroshima screamers and classic Mini Cooper S's
Posted 02 June 2016 - 05:39 PM
#2
Robert
-
- Members
-
- 9,419 posts
Brappp
- Gender:Male
- Location:Central Coast, NSW
- Interests:Door Frames
Posted 02 June 2016 - 07:46 PM
Going to say no
The rear will most likely be a r180 rear and which is different to your wrx
And the front may fit depending if your gearbox has male or female stubs on the front diff
The sti will have the stubs on the shaft rather than the gearbox
The rear will most likely be a r180 rear and which is different to your wrx
And the front may fit depending if your gearbox has male or female stubs on the front diff
The sti will have the stubs on the shaft rather than the gearbox
#3
Badger1
-
- Members
-
- 19 posts
New Member
- Gender:Male
- Location:Melbourne
- Interests:Hiroshima screamers and classic Mini Cooper S's
Posted 03 June 2016 - 10:24 PM
I'll be fitting a R180 with the conversion. The shaft stubs are male on both mine and the 6 speed units. My main concern is the compatibility of the CV splines fitting my hubs. If not then the possibility of fitting my CV's onto the wheel end of the 6 speed's half shafts.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
