Hey guys,
I wanna take my wing off my gen 3 Liberty, Iv got the nuts off the inside of the boot out but it's still not coming off, it wobbles a fair bit but is still pretty tight. Has anyone got any tips how to take it off?
Gen 3 wing removal
Started by Mmmbye, Dec 22 2016 02:05 PM
6 replies to this topic
#1
Posted 22 December 2016 - 02:05 PM
#2 Guest_KONG_*
Posted 22 December 2016 - 02:23 PM
So you've removed 4 nuts in total?
If so, give one of the threaded bolts a tap with a screwdriver handle.
Hold the wing while you do it or it may fall and scratch the boot lid.
If so, give one of the threaded bolts a tap with a screwdriver handle.
Hold the wing while you do it or it may fall and scratch the boot lid.
#3
Posted 22 December 2016 - 04:43 PM
Yeah it eventually did the trick! Thanks for that
#4
Posted 22 December 2016 - 05:51 PM
What are you going to do with the holes in the boot lid?
OEM+
#5 Guest_KONG_*
Posted 22 December 2016 - 09:01 PM
At the very least grab some blank gromets from Repco or somewhere.
A few $$$ to stop any water from getting in is worth it.
A few $$$ to stop any water from getting in is worth it.
#6
Posted 24 December 2016 - 06:01 PM
Get the holes welded and the boot re-sprayed.
That's doing thing's correctly.
That's doing thing's correctly.
OEM+
#7
Posted 25 December 2016 - 08:28 AM
At the very least grab some blank gromets
I thought the very least was some duct tape?
I see it on Commodores all the time.
I agree with Mark, weld and paint; or get a wingless bootlid from a wrecker.
If I told you I was a compulsive liar, would you believe me?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users