3 replies to this topic

[Dylan720]

Hi all ive taken my intercooler off my b4 and replaced all the hoses i marked ahere each hose goes and followed diagrams every hose is where they were before. Now i have q cel and svanner reads p0108 code i replaced my airflow meter to and uf clear the code while engine running it stalls on me and is back on when i start the car. Any help would be great thanks

[duncanm]

P0108 is "MAP Sensor input high"

 

I suspect you forgot to plug it back in.

[Dylan720]

Thanks mate i fixed it turned out it was coroded cleaned it out and all good now im having another issue now thow before replacing all hoses ide hit around 3500 to 4000 rpm and the turbos would kick in but now dont seem like the primary turbo is working like i hit 7000 rpm in 1st gear with nothing then get into 2nd gear and the secondry turbo kicks in and pushes me back in my seat

[Dylan720]

Hi just thought ide post this ive been told to replace fuel pump and knock sensor that seems to be causing my code according to my mechanic