Howdy lads,
I've researched so bloody much and can't find a definitive answer.
Long story short, rack and/or bushes are dicked, and I'm looking at (obviously) a quick rack. Specifically, an early GD (pre '06) STi Spec C FE440.
I already have some SuperPro bushes and I got myself the Whiteline KCA313 kit.
From what I've read, there is a GC to GD knuckle adapter which I know will fit a gen 2, can anyone confirm it will fit a gen 3?
Lines etc seem to be p'n'p.
Any insight would be useful.
Thanks all.
STi FE440 quick rack in BE/BH
#1
Posted 01 December 2019 - 06:41 PM
#2
Posted 01 December 2019 - 08:13 PM
MY02 LIBERTY B4 - LAST DYNO'D @ 375.4KW-ATW 403.5KW-ATW
Next Dyno will be 400+
#3
Posted 01 December 2019 - 08:16 PM
Done it in mine , I think I used a GC8 one
GC8 rack or knuckle?
#4
Posted 02 December 2019 - 07:54 AM
Old Man River has a GC8 quick rack in his outhouse with a normal knuckle iirc
#5
Posted 02 December 2019 - 05:39 PM
Old Man River has a GC8 quick rack in his outhouse with a normal knuckle iirc
I mean, that would be alright, but 2.2 turns to lock just sounds fun
Although, even 2.7 would be nicer than my shitheap. Just that little bit quicker.
I sent an email to L&E Fabrication in the states to see if a BE/BH adapter could be made available. If not, I'll probably move to a GC/GF option instead. Jeeezzzz, the Type RA ones are pricey as shit!
#6
Posted 02 December 2019 - 08:40 PM
I meant as in the Gen 3 knuckle is same same as gen 2/GC etc
#7
Posted 03 December 2019 - 05:00 PM
I meant as in the Gen 3 knuckle is same same as gen 2/GC etc
Ooooh, so the L&E GC-GD thingy would fit..
Wicked! You're a gun Nick, thanks! Don't know why I struggle with steering racks lol.
#8
Posted 07 December 2019 - 12:59 PM
Old Man River has a GC8 quick rack in his outhouse with a normal knuckle iirc
That boi speaks the truth.
In regards to fitment, the GC bolts straight in.
But my halfcut had the speed sensitive GTB rack, the pipes go in on a different angle to the standard racks,
Enzed had to mod my turbo lines to make it all fit.
Your H6 should be a straight swap unless it has the speed sensitive rack.
#9
Posted 12 February 2020 - 05:19 PM
Ban stick for this cubt.
#10
Posted 12 February 2020 - 05:44 PM
Ban stick for this cubt.
You know there’s a report button? Use it!
Cheers
Bennie
https://www.imageshack.us/i/po1BKrxbj
El Freddo's Pics - El_Freddo's youtube
#11
Posted 13 February 2020 - 08:33 AM
Reporting only works if an admin comes online
#12
Posted 13 February 2020 - 11:57 AM
Reporting only works if an admin comes online
True. But it’s there for them to deal with rather than fishing around or stumbling across it. That’s why it’s there so we keep the forum clean of this crap through reporting it.
That’s my take. I’ll continue reporting it...
Cheers
Bennie
https://www.imageshack.us/i/po1BKrxbj
El Freddo's Pics - El_Freddo's youtube
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users