28 replies to this topic

[93tzlegacy]

edit:
heres a few pics from the LBMCCC motorkahna at EC yesterday, i dont think Ken Block has anything to worry about ... YET
thanks to Peter Richardson for the pics





also heres a few pics of the power steering cooler ive installed under the bonnet scoop.








just thought id ad this pic for a bit of a comparison.
this was taken a week after id bought it, all i had done was fit rx lib 16s.


hey guys heres the most recent pics, taken yesterday














New engine pics:







older engine pics:




Heres the specs:

Engine:
MY05 WRX bottom end
V9 STi spec C avcs heads
05 wrx manifolds
AM auto twisted up pipe
Rebuilt GTPS02 turbo
MY05 WRX alloy header tank and custom bracket
Greddy alloy catch can
52mm alloy radiator
Silicone coolant hoses
custom fan shrouds housing GX lib fans
turbo XS 3 port boost solenoid

Driveline:
MY05 wrx gearbox (with auto shaft mods)
MY00 STi RA R180 plated lsd incl shafts
MY00 wrx cv shafts front
MRT billet chromoly 5.6kg flywheel
exedy HD organic clutch
custom made braided clutch line

Induction:
K&N pod filter
Custom flipped core Front mount intercooler with bar and plate core
V2 STi water spray controller and switch. 4 mist sprayers mounted on lip of front bar
Blitz BOV modified for plumb back
custom alloy intake pipe
in guard CAI
MY05 WRX afm

Steering and Suspension:
Tein flex coilovers front and rear
V5 sti Carbon fibre strut brace
whiteline lower H brace
Nolthane bushes throughout front
Noltec lower control arm bush kit
cusco rear control arms
cusco lateral arms
V6 sti power steering rack
MY05 wrx power steer pump
Whiteline 20mm swaybar front
whiteline 22mm adjustable swaybar rear
sti swaybar links front
Nolthane swaybar links rear
V6 STi alloy control arms

Interior gadgetry:
Blitz Turbo timer
V2 STI nardi steering wheel
MY05 wrx ecu , retuned
Legacy GT wiring harness incl climate control, modified by AMauto for 05 WRX engine and ecu
Legacy GT dash cluster
Speco boost, oil pressure , water temp and volts gauges
split fire air fuel gauge
Pioneer DEH P1Y headunit
Pioneer 12 disc stacker
Pioneer i Pod controller
60 gig i Pod installed in centre console
2 sets of kevlar 6.5 inch response splits in custom fibreglas pods
1 set of 2 way 6.5 inch kevlar response speakers in stock rear location
2 4x100 wrms response amps in roof
1 760 wrms monoblock response amp in stereo install
2 12 inch response carbon fibre dvc subs in install

Brakes:
MY99 WRX brakes front
project my 2 piece rotors front
project mu hc plus pads front
weds sport blue pads rear
my00 STi 2 pot brake package rear (to suit R180)
Goodridge braided lines all round
AP racing Dot 5.1 brakefluid

Exhaust:
AMauto divorced twisted , divorced dump pipe
hitech 3 inch cat back
also have V8 sti rear muffler

Seating :
my01 WRX sedan seats front and rear

Wheels and tyres:
Road;
Lenso Mean 6 18x 7.5 wheels
Kumho Ecsta SPT 215 35 R18 tyres
track;
MY07 WRX 17 inch alloys with
falken azenis semi slicks

Exterior:
Subaru 230 white
Matte black bonnet and roof
Liberty RS Bonnet
Liberty RS side skirts
Legacy GT front bumper
exciting yamato front clip on
Legacy GT side blinkers
Legacy Brighton front grille
Gen 2 Legact GTB badge on grille
MY06 STi badge on grille
Legacy GT rear bar and lower lip
Legacy Series 2 Brighton rear garnish with custom TZ badge inlaid
Legacy GT tail lights
removed rear wiper
tints all-round
custom TZ Turbo graphics



All comments / criticisms and suggestions welcomed . thanks for looking, Ben.

[Soop]

Loving it mate. It needs another coat of black on the roof, its see through!! Also, a Leather gear boot would look sweet. I remember you saying something about perhaps building a 2.5ltr, whats the go with this now?

[93tzlegacy]

Loving it mate.
It needs another coat of black on the roof, its see through!!

Also, a Leather gear boot would look sweet.

I remember you saying something about perhaps building a 2.5ltr, whats the go with this now?

i have had the roof resprayed so it looks way better
a 2.5 is going to happen but it will be a way off now that the wrx bits have come up.

[Soop]

Yeah fair enough mate. 2.5+ AVCS will be very nice. Whats the go with your coil overs? Do you find them alright? Only reason i ask is because looking through your mods list, its quiet expensive, and well... G4's arent.. Are they a stop gap or do they function well for their intended purpose?

[Mav]

now this is alot better looks pretty good man, like the mods thats you've done cept that cannon... im still out on the white/black combo but neat car all round nice pics too!

[Jeff]

Top pics mate. Very nice list of mods

[fatcat67]

Matt black bonnet and roof FTW. Loving it.

[ams]

Awesome looking car and gee'z, what a list of mods!! Dare I ask what its (roughly) set you back $$$ wise? Did you ultimately build it for show or go?

[CRUISN]

Very impressive. The monochrome scheme works well for me.

[93tzlegacy]

the car has been my daily driver, in all honesty the g4s are shit, i would love some buddy clubs but recent finance changes killed that dream, its a sub $10k car as i have built it myself and used secondhand parts, i also sold off parts that i removed and upgraded, for instance i sold off my td05 when i got the vf24 (and made a profit ) thus offsetting the cost of mods. the car no longer has a cannon, but a 2,.5 inch sti muffler with extended tip

[Dylan]

I love this car Benny. I love what you've done with the HEC716's and I plan to relocate mine to a similar position when I fudge my top mount off. Well done, I have been a fan for a while

[93tzlegacy]

thanks for the comments, anso to the mod who edited my title libercy is what its been dubbed as its part liberty part legacy......

[Soop]

LOL which n00b didn't realise that!!!! Hahahaha. Whats the go with your FMIC pipe work mate? Polished stainless? What was the mod you were going to do to it?

[93tzlegacy]

LOL which n00b didn't realise that!!!!

Hahahaha.

Whats the go with your FMIC pipe work mate?
Polished stainless?
What was the mod you were going to do to it?

its alloy, and will needed to be modded for the 04 engine.

[Soop]

Ahh nice. What's the reason for using Alloy? I thought about it myself, but i fail at welding Alloy. Well at making it look good anyway.

[Dylan]

thanks for the comments, anso to the mod who edited my title libercy is what its been dubbed as its part liberty part legacy......

Haha, yeah. My bad.

I just assumed you'd hopped aboard the fail-train Ben and had a fit whilst typing the subject. I'll know for next time

LOL which n00b didn't realise that!!!!

Hahahaha

Shut yo' mouth, Pauly

[93tzlegacy]

Ahh nice.
What's the reason for using Alloy?

I thought about it myself, but i fail at welding Alloy. Well at making it look good anyway.

the original fmickit i bought was alloy, so i just kept with it, plus its lighter

[93tzlegacy]

new pics first post.

[CRUISN]

That new front bar looks the goods, as of course does the whole wagon. Any plans on painting the sideskirts and rear skirt white?

[93tzlegacy]

well the front bar actually has a black lower section, but i think it needs to be raised up a bit.