how hard is it to replace reo bar??
#1
Posted 23 September 2010 - 11:38 PM
#2
Posted 24 September 2010 - 12:39 AM
Gen2 it is easy, 4 bolts and you can slide the whole front bar off with the reo and replace from there. Other generations I am not too sure about - give some more info about your car and someone will be able to give you some pointers !
#3
Posted 24 September 2010 - 12:46 AM
#4
Posted 24 September 2010 - 08:51 AM
I would have gone to the kitchen, collected a brown bag, dropped my dacks, pinched off a loaf in said bag, done up dacks, stickytaped bag, placed bag in envelope, and mailed it right to your face for being such a tool.
It's ok, sometimes when we herp, we also derp.
#5
Posted 24 September 2010 - 09:52 AM
#6
Posted 24 September 2010 - 09:55 AM
Here's the first bolt, in front of the air con condensor:
Here's the second bolt, behind the air con condenser:
There are two matching bolts on the other side of the car, but I can't get a camera in there these days.
As for the bumper, there's two places it joins at the radiator:
and
There's also a bracket in front of each wheel:
On top of these, there is one or two bolts above the brackets, on the inside of the bumper. I can't get a camera in there, but you will no doubt find them on your own...
I would have gone to the kitchen, collected a brown bag, dropped my dacks, pinched off a loaf in said bag, done up dacks, stickytaped bag, placed bag in envelope, and mailed it right to your face for being such a tool.
It's ok, sometimes when we herp, we also derp.
#7
Posted 24 September 2010 - 10:25 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users