11 replies to this topic

[Jordan]

We already have this Write Up (thanks TMH983)
http://www.subyclub....__fromsearch__1

Which I plan on doing when i get a day off...
But is it possible to have it make a sound (beeping) When it locks/unlocks (like most people had at Morgans) Without buying a whole new alarm or keyless entry system?

Any help would be appreciated,

Cheers
-Jordan.

[Steveee]

Yeah I'd been keen to add some beepBACK

[Adam]

Guys, there's a link in that thread on how to do it

[Jordan]

That link is for an Outback (and id assume Lib Wagon) where there is a wiring harness under the lever that opens the boot.. (which solves steves problem)

I need to know where that harness is in my Sedan.

[AussieTemplar]

You won't get a beep unless you buy a siren.

[Jordan]

Do you have one Nick?
I remember you pointing to something in your engine bay and saying its the alarm beeper i think.

[tmh983]

In my keyless entry module there were 2 spare relays which I hooked up to the LH and RH indicators. Instead you could probably get away with hooking up both LH and RH indicators to one relay, leaving the second spare to power a buzzer.
I think 1 relay should be able to handle the current of all the indicators, it only switches on for a very brief time.

[SAV84C]

No need for a siren or any relays...

You can wire it into your tailgate lock or door lock actuator with a Piezo buzzer from jaycar http://www.jaycar.co...w.asp?ID=AB3456

Only problem is u can only have it on either lock or unlock.

[Adam]

could wire it to indicators via a relay? so you get lock and unlock?

[AussieTemplar]

Do you have one Nick?
I remember you pointing to something in your engine bay and saying its the alarm beeper i think.

Yeah I've got a siren from my immobiliser. That's a whole different thing Jordy.

[Sam]

My piezo beeper beeps both on lock and unlock.
It's not very loud though and I'd love for some of you guys to show me a louder beeper rather than the quiet piezo beeper.

[Steveee]

In my keyless entry module there were 2 spare relays which I hooked up to the LH and RH indicators. Instead you could probably get away with hooking up both LH and RH indicators to one relay, leaving the second spare to power a buzzer.
I think 1 relay should be able to handle the current of all the indicators, it only switches on for a very brief time.

I think ill try do this, cause the one in that manual the guy has a mp3 of it and its just a long beep, i'd rather make it do the beep beep and beep that is similar to the length of the flashes from the indicators. Would having the piezo in under the dash near the unit be a problem, loud from inside I spose, though unless you are physically challenged or dosing on some strong **** i don't think you will be locking your car while you're in it.