my gen3 lib wagon!
#1
Posted 24 June 2012 - 07:09 PM
gen3 silver rx wagon n/a 2.5l manual- of course
its current state as of now
stock motor with a custom (homemade) CAI with the mass power producing pod filter.
replica borla UEL extractors with stock cat and 2.5' cat back with a larger res into a hitech muffler with 4' tip which i think sounds lovely with no drone whatsoever
BC v1 coilovers
whiteline 22mm 2point adjustable front sway bar
whiteline 20mm 2point adjustable rear sway bar
whiteline heavy duty adjustable endlinks rear
cusco front strut brace
replica b&m short shifter
tinted tailights/garnish, masked off the reverse/indicator lights so they stayed clear
crystal black side indicators
wrx 17's sprayed dodgy black as Shiv enjoyed pointing out yesterday
custom number plates i always wanted; 2DESIR
debadged tailgate
RFRB front grille
phillips diamond vision low beams
white led's in all interior bits and number plate lights
purple led's behind dash with a black cluster
jvc head deck running a kicker zx400.1 with dual kicker komp 12' subs
soundstream 6.5' splits in front, kicker 6'splits in the rears and infiniti tweeters
tinted windows
carbon fibre wrapped fuel cap
thats about it as far as i can think
and the sad stuff, gearbox has started to whine under load and just in general now and making a wierd noise when i shift, with knocking on idle and dissapearing when i hit the clutch. currently no idea. but its nearly tax time so ill be sourcing a new one, possibly wrx box when i find out which fits in and a hd clutch
ldyl3.jpg 450.37KB 10 downloads
P5101212.JPG 265.76KB 3 downloads
will pop up new pics during the week when i find the time
Cheers, Matty
#2
Posted 24 June 2012 - 07:17 PM
#3
Posted 24 June 2012 - 07:20 PM
thanks mate they were cheap and i didnt do it ! your rs brought back memories of my gx wagon, except yours is well and truely as mint as they come and mine was well beige and crap hahaLooked good on the cruise Matt, the crappily-sprayed black rims just add character
#4
Posted 25 June 2012 - 01:47 PM
#6
Posted 25 June 2012 - 02:03 PM
#7
Posted 25 June 2012 - 02:30 PM
#8
Posted 25 June 2012 - 02:37 PM
#9
Posted 25 June 2012 - 02:39 PM
your motor did head gaskets and needs a new motor yer? she would no the difference.Lol i havnt quite decided on the turbo part of it. Id love an sti conversion but theres outside issues (the woman) haha i was going to take them back to the oem paint but it was taking forever, might just respray them wednesday
#10
Posted 25 June 2012 - 02:44 PM
#11
Posted 25 June 2012 - 03:11 PM
pm me, i got a old box in the sheed you can have for cheap if you want it, got a blown viscouse but can make one good box out of this one and yours.She knows everything lol. Ill do a conversion and just tell her it was cheap as chips haha i dont have much choice anyway 302000ks and the gearbox is ready to give up regardless it will eventually need a rebuild/swap and being 4months off my fulls gives me time to plan
#12
Posted 24 July 2012 - 11:24 PM
#13
Posted 25 July 2012 - 09:50 AM
2002 Outback - it's gone...
#14
Posted 25 July 2012 - 10:15 AM
#15
Posted 27 July 2012 - 10:23 PM
Got any more pics mate?
Jordan - MY02 Forester GT - Sydney
#16
Posted 28 July 2012 - 08:58 AM
#17
Posted 28 July 2012 - 04:41 PM
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#18
Posted 28 July 2012 - 06:05 PM
Love it
Cheers, not sure whats happening with that cruise pic, cant see it on my comp or phone. Useless bloody things. Ill upload a few tomorrow
#19
Posted 29 July 2012 - 03:22 PM
hunter valley shot again
1.jpg 56.49KB 3 downloads
where its sit broked for the next fortnight
010_opt.jpg 33.51KB 3 downloads
009_opt.jpg 32.91KB 3 downloads
in action, not sure who took the pic but cheers !
7425310290_436b7a49fe_h_opt.jpg 30.67KB 3 downloads
#20
Posted 04 August 2012 - 04:40 PM
Camseals,idler bearings,crank shaft and beatings, timing belt and tensioner, and water pump 1100$ parts/labour i was hoping for under a grand but its alive and running beautifuly.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users