Random Bonnet Scoop
ScoobyOutback 24 Oct 2012
Found this on ImportMonster and just wanted to know how on earth this would actually work?
As far as I can tell they seem like there original photos. Thoughts???
As far as I can tell they seem like there original photos. Thoughts???
simon 24 Oct 2012
Thats weird looking..... I suppose it would suck warm air out ofthe engine bay.
Soop 24 Oct 2012
Front mount stylez?
Well, if you had a front mount, I don't think that scoop would work any better at venting the engine bay temps then if it were forward facing.
Jordan 24 Oct 2012
I've seen some video of a classic impreza STI RA (not 100% on what its called) and it came like that stock
TSG 24 Oct 2012
Makes sense I guess, encourage the hot air to escape up and out as you drive along with a front mount.
Matt 24 Oct 2012
OMG thats ugly!!! Looks so odd lol
Itd work well if you drove in reverse all the time?
Itd work well if you drove in reverse all the time?
4rstr 24 Oct 2012
Trying to remember back to 2nd year fluids but i think the faster(low pressure) moving air over the bonnet/vent will 'suck' the slower (higher pressure) air out of engine bay, like a pitot tube, removing hot air.
Car will require a front mount or water to air intercooler (dont think these need a scoop?) instead of top mount for adequate cooling.
Car will require a front mount or water to air intercooler (dont think these need a scoop?) instead of top mount for adequate cooling.
FR34KO 25 Oct 2012
I'd be pretty inclined to believe it'd make a good difference.
engine in the way? so what, air is held up by little to nothing
I'd think it'd remove air from behind the FMIC more effectively, and allow air rushing in from the front some more room to move through
engine in the way? so what, air is held up by little to nothing
I'd think it'd remove air from behind the FMIC more effectively, and allow air rushing in from the front some more room to move through
Soop 25 Oct 2012
I'd be pretty inclined to believe it'd make a good difference.
engine in the way? so what, air is held up by little to nothing
I'd think it'd remove air from behind the FMIC more effectively, and allow air rushing in from the front some more room to move through
It would work like a chimney at best. You're not going to get a sudden rush of air escaping from the engine bay.
Adam 25 Oct 2012
Trying to remember back to 2nd year fluids but i think the faster(low pressure) moving air over the bonnet/vent will 'suck' the slower (higher pressure) air out of engine bay, like a pitot tube, removing hot air.
Car will require a front mount or water to air intercooler (dont think these need a scoop?) instead of top mount for adequate cooling.
I was gonna type something something Venturi something something.
But you said it better!
Matt 25 Oct 2012
Yeah they do, but you need a much bigger vent closer to the front of the car as you need a good flow through itHi.
Don't they do that on v mounts?
Cheers
Nik
Those scopps struggle to move air when faced the correct way so itd do a whole lot of not much at all that way
Lifting the rear of the bonnet would help a whole lot more (only if running a fmic!!, dont do this with a tmic as it screws up the air movement through the core)