21 replies to this topic

[Scuba-Roo]

Mine is to buy these
http://cgi.ebay.com....r...A1|240:1318

and make them fit my car, since genuine RS items for G1S1's are rare


Next is to buy tristains exhuast, mainly for the headers, well probably just the headers, anyone know if they fit a g1?

[Soop]

Its a fair whack of work to get those skirts to fit mate. I'm pretty sure they're too short. And the lip from the bar wont fit the G1S1. Twitstains extractors will fit, but the exhaust wont. Better off getting a custom 2.25' mandral bend exhaust anyway.

[SUBARU]

I like where you're heading, but yeah, it'll be a b*tch to fit! Have you had a look on import monster for parts? Double check that the headers will fit. It was my understanding that they only fit on the Gen2 NA's (ex RX) and the Gen3 NA's.

[Soop]

No they fit gen1's. But they wont match up to the G1S1 standard exhaust system. But meh. Custom ftw.

[Scuba-Roo]

i didn't really want his exhuast, just the headers rly, his zorst could be usefull tho in cutting it apart to fit mine? i already have a xforce muff i dat i rly wuv, so maybe custom exhuast ftw By a bit of work do you mean careful sanding down to size, cant be that hard to bog and sand

[Soop]

No like extending about 30mm.... Just get a full custom exhaust. $600 will do it easy as piss. less if you match it up to the existing muffler.

[Scuba-Roo]

No like extending about 30mm....

Just get a full custom exhaust. $600 will do it easy as piss. less if you match it up to the existing muffler.

do you mean use the ebaytristo headers?

[Soop]

You've lost me. The WRX kit wont fit. The extractors will, but not to the standard exhaust system. comprende?

[Scuba-Roo]

You've lost me.

The WRX kit wont fit.

The extractors will, but not to the standard exhaust system. comprende?

sorry

Yer over wrx kit already lol

i ment for your guess/estimate of $600 if that was for a complete custom exhuast ie: custom made headers, or the exhuast after the headers tristan has, i guess a catback with a new cat.

[Soop]

Yeah, everything south of the extractors. To sumerise. Get Twitstains Extractors (I wouldnt pay much, if anymore than $100 for them) and then a complete custom exhaust. new cat will cost anywhere between $200 and $400. A metal substrate Hiflo cat is really going to be a waste of your money. Seems as though you just want a nice note, and general purpose multi-fit cat will serve you well enough. Just make sure its the same diameter as the rest of the exhaust system, Perhaps even go 0.5" bigger to compensate for the lack of flow.

[Scuba-Roo]

T-man wants 200 for them... but when he reads this and takes pitty on me... I currently have a 2.25" diff back as it is what was on the muffler, so i was thinking go that, Most people say 2" is big enough, my goal isnt power its sound, so maybe 2.25" which in theory should deepen the sound,and "shouldnt" loss power. IMO all the gen1 NA's i've heard sound wimpy, maybe its somthing else but meh last quote i got was about $300 for a hiflow cat, but the dewd sed about $300 for any cat. ebay has cats from between 100-300 which may be an option, used to have xforce ones cheap but can't seem to find them.

[Soop]

Dude..... I got my extractors for $180 brand new.. F*ck paying $200 for second hand items...

[Scuba-Roo]

sell me yours haha yeah tristain hear that :P

[Soop]

Can't. Mine are on the car....

[Scuba-Roo]

Maybe you could bend a new one with that pipe your gonna have laying around

[Blaeven]

supply and demand my friends... sold the extractors today, $200 to some kid off ozNoob... god-daym the car sounds weird without them... and it definitely lost some low down power... sorry scuba!

[Scuba-Roo]

thats ends the thread, will have a look on ebay, im not to worried new mid section on my car will make it sounds nice, besides a ej25 conversion sounds better

[Soop]

Grab a welder and make your own mate. Heck, I may just see about making a set myself. Just for sh!ts and giggles.

[Shiv]

supply and demand my friends...

sold the extractors today, $200 to some kid off ozNoob...

god-daym the car sounds weird without them... and it definitely lost some low down power...

sorry scuba!

$200?! Take it and run! Good stuff....

[Scuba-Roo]

Grab a welder and make your own mate.

Heck, I may just see about making a set myself. Just for sh!ts and giggles.

i looked into it a while back

probably wouldnt be too hard


Problems i come up with was bending the pipe as we dont have a pipe bender that i know of, i guess i could go to local exhuast shop and get it bent

At the time we didnt have any gas for our welder, but i think dad got some not too long ago


I'll probably just get a new catback with the cat