Gen2 reverse + fog light problem
#1
Posted 09 April 2013 - 08:04 PM
Hey guys have moves out and currently have no Internet so sadly haven't been on here much lately =[
Anyway.. I have a gen2 liberty sedan rx billy.
1.Does anyone know about the rear fog lights? Mine don't work but in saying that there is no switch for them but the globes are there how can I get them working it seems to be wired up as standard ???
2. My reverse lights are PATHETIC any suggestions on some super bright globes. I tried some shitty eBay ones which wore the same as standard if not worse even though advertised as SUPER BRIGHT LED
3. My climate control doesn't light up at all anywhere I can get the globes ?
Have check ALL FUSES all are fine and working
Thanks in advance for all and any help.
Cheers Dan
#2
Posted 10 April 2013 - 12:17 AM
http://www.ebay.com....=item1c2f424988
#3
Posted 10 April 2013 - 12:24 AM
#4
Posted 10 April 2013 - 12:40 AM
#5
Posted 10 April 2013 - 12:42 AM
Ha that was my DIY. Should probably find the pics and make one here. Was pretty useful back in the day when everyone had gen 2's!
I was gonna say it was yours, but couldn't remember. It applied to Gen 3's as well.
I like to think of it as borrowing someone's car and driving it better than them.
#6
Posted 10 April 2013 - 07:56 AM
There similar to the ones I tried but twice as expensive so surely that means twice as good =P
Is it hard to wire them up to a switch of its own.
My 2000 wrx was like that from factory
would like to have it set up the same if possible.
#7
Posted 10 April 2013 - 09:13 AM
I did a DIY on how to wire them up as extra brake lights. They're too bright for extra tails.
#8
Posted 10 April 2013 - 09:35 AM
They will reduce the ability of other drivers to notice your brake lights.
They will piss off other drivers who will kill you with fire.
They will attract the attention of the Police who will fine you.
You may struggle to find LEDs that will output enough light to improve your reverse lamps a noticeable amount.
Are the lenses clean on the inside and the reflectors in good condition?
I did a GenIII DIY on OzLib off the back of Morg's GenII DIY.It applied to Gen 3's as well.
If I told you I was a compulsive liar, would you believe me?
#10
Posted 11 April 2013 - 10:00 PM
#11
Posted 11 April 2013 - 10:07 PM
#12
Posted 11 April 2013 - 10:29 PM
Get better eyes
The Cree style LEDs seem pretty bright but I haven't purchased them yet.
#13
Posted 11 April 2013 - 10:32 PM
#14
Posted 11 April 2013 - 10:43 PM
The Cree style LEDs seem pretty bright but I haven't purchased them yet.
I just got some ebay-spec ones.. see if they're any good. Then when they die in a month, get some proper ones
I like to think of it as borrowing someone's car and driving it better than them.
#15
Posted 11 April 2013 - 10:49 PM
Mitch sorry yeah it's just the buttons that don't light up the display is fine =D
Stocky which globes did you buy? Keen to see a comparison picture of stock and eBay globes and if there any good ill get some. Really frustrates me how pathetic mine are.
#16
Posted 11 April 2013 - 10:53 PM
I like to think of it as borrowing someone's car and driving it better than them.
#17
Posted 11 April 2013 - 10:54 PM
Have you fitted them yet? Any good?
#18
Posted 11 April 2013 - 10:56 PM
I like to think of it as borrowing someone's car and driving it better than them.
#19
Posted 11 April 2013 - 11:00 PM
When you say real globes do you mean like the ones portugese_gorilla suggested
http://item.mobilewe...Id=121051957640
#20
Posted 11 April 2013 - 11:05 PM
I like to think of it as borrowing someone's car and driving it better than them.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users