108 replies to this topic

[WALKER]

How did you paint the inner front bumper?

Plastidip?

 

I don't think you could improve your car in anyway. It's awesome.

[Barbbachello]

Lol yeah that is a bit far north. I think we might come up your way one night for a change sometime in the future

[Hypnotic]

I'm in Craigieburn, I'll try and head down some time, but yeah I'm really far up north haha
 

Lovely place, I remember when I used to work around there, they were fun times...........

[effortz]

How did you paint the inner front bumper?

Plastidip?

 

I don't think you could improve your car in anyway. It's awesome.

 

Just masked up the lining on the front bar, took the plates off and put some cardboard in between the bar and the radiator, was a bit hard doing the top mouth of the bar car was too low to get a decent angle on the can haha, thanks man

 

Lol yeah that is a bit far north. I think we might come up your way one night for a change sometime in the future

 

Wouldn't mind coming down, hardly any members down my side but wouldn't mind a cruise to that side for a meet maybe if I invest in a citylink pass wouldn't take that long

 

Lovely place, I remember when I used to work around there, they were fun times...........

 

Haha you use to work around here? I was originally from the Cranbourne side, but I was very young, been in Craigieburn for 14 years haha too far from everything

[WALKER]

 

Just masked up the lining on the front bar, took the plates off and put some cardboard in between the bar and the radiator, was a bit hard doing the top mouth of the bar car was too low to get a decent angle on the can haha, thanks man

 

 

Did you use spray paint or did you use plastidip?

I photoshopped my car and blacked out grill and inner bumper.

 

I'm def going to paint grill.. I haven't decided on inner bumper.

If i did it'd be plastidip so I can remove

[Hypnotic]

Haha you use to work around here? I was originally from the Cranbourne side, but I was very young, been in Craigieburn for 14 years haha too far from everything

You poor bastard

 

Used to work down the road at Campbellfield, but as a courier, was sent everywhere, and Craigieburn was a main area, plus I did excavating for a while, in the new estates (at the time they were new)  on the hill up there

[effortz]

 

Did you use spray paint or did you use plastidip?

I photoshopped my car and blacked out grill and inner bumper.

 

I'm def going to paint grill.. I haven't decided on inner bumper.

If i did it'd be plastidip so I can remove

 

My grill I sanded down and used a spray can but my bumper was done with the amor all thing, similar to plastidip, I just did the first coat really light, then went heavy with the rest, drys really quick as well it's such an awesome product haha

 

You poor bastard

 

Used to work down the road at Campbellfield, but as a courier, was sent everywhere, and Craigieburn was a main area, plus I did excavating for a while, in the new estates (at the time they were new)  on the hill up there

 

Hahaha! Oh yeah, that's pretty cool, the areas developing pretty quick, hopefully they fix the roads, too many pot holes haha

[effortz]

[Hypnotic]

Wheels look fuckin DOPE!!!

[effortz]

Wheels look fuckin DOPE!!!

 

Hahah thanks man! liking them a lot!

[Mosti]

Are they the XXR's?

[nickknack]

Noice. What are the specs?

[effortz]

Are they the XXR's?

 

Nah just some bbs lm reps, not too sure on the brand, bought them through Advance Tyres, Melbourne

Noice. What are the specs?

 

18x8 +35

[Liberty]

Really nice man! They look sick!

[Mosti]

They look good!

[effortz]

Cheers guys!

So i'm looking at buying the GT-B front bar for this car, $566 posted, is that a bit too much? Going to check wreckers tomorrow for outback bars, if I can't find anything then

I'm most likely going to buy the GT-B bar
Also would just like to know if the Ultrex front lip for the B4/MY06 WRX fits this front bar? 
 

Thanks!

[TSG]

I believe Outbacks have a different size grill. Might leave a gap with your current one. Make sure its for a facelift Gen3, early bars wont fit it. The Ultrex lip will fit your current bar, but I don't know about the others.

 

$533 sounds ok posted if its in good condition. The S401 bar is nice and not many have it, they pop up on Import Monster. But surely you can find one from a wrecker cheaper, its going to cost a bit to get it colour coded too - if it isn't already. A Wagon one (I think it might be the same as GTB) is also nice.

[effortz]

I believe Outbacks have a different size grill. Might leave a gap with your current one. Make sure its for a facelift Gen3, early bars wont fit it. The Ultrex lip will fit your current bar, but I don't know about the others.

 

$533 sounds ok posted if its in good condition. The S401 bar is nice and not many have it, they pop up on Import Monster. But surely you can find one from a wrecker cheaper, its going to cost a bit to get it colour coded too - if it isn't already. A Wagon one (I think it might be the same as GTB) is also nice.

 

Ahk thanks for that mate, didn't realise preface lift wouldn't of fit
Yeah going to do some rounds tomorrow to check out wreckers to see if they got any front bars, will check import monster as well!

GTB bar has grown on me, I want it with the rsk lip as well though.

[Barbbachello]

S401 replica bars are like 1k landed so... yeah

[TSG]

 

That's the wagon one I was referring to... might look nice on a Sedan. I have a Wagon E-Tune grill on mine  without the extra badge.

 

Yeah I noticed it had some damage repair too, so I removed my link.

 

Edit: This must be the lip for it.