3 replies to this topic

[PoweredX]

Hey all,

 

Needing a camber kit for front and rear. I was looking at these for the fronts 

 

http://www.ebay.com....226c6952&_uhb=1

 

Wasn't sure if i could have camber bolts for the rear? I was sure I had to get a camber control arm, but just wanted to make sure....Would these be enough as well to make my wheels fit (i assume so)

 

 

Also brands, stores, locations in Melbourne that are recommended or just ebay it all? 

[bobbyjimmy]

Those bolts will fit the front's - can get them cheaper thou.

$30 from the US - http://www.ebay.com/...b8c6332&vxp=mtr

$31 from the UK - http://www.ebay.com....859b541f&_uhb=1

$60 from Straya - http://www.ebay.com....7480d7c3&_uhb=1

 

MAKE SURE THEY GO IN THE LOWER HOLE AT THE FRONT, set it to MAX negative camber.

Keep the stock bolt in the top and use the stock one to adjust the camber.

 

Rears you can either get Whiteline "KTA124" (front and rear lateral link set) for $540RRP or "KCA399" (bush kit, goes the the centre lateral link) for $111RRP.

Could also get Megan racing arm http://www.meganraci...d=1437&catid=97 (centre lateral link) for ~$250 landed here (need to use a re-shipper thou) - these are the same as Hardrace "6854" but work out cheaper landed here.

[PoweredX]

Those bolts will fit the front's - can get them cheaper thou.

$30 from the US - http://www.ebay.com/...b8c6332&vxp=mtr

$31 from the UK - http://www.ebay.com....859b541f&_uhb=1

$60 from Straya - http://www.ebay.com....7480d7c3&_uhb=1

 

MAKE SURE THEY GO IN THE LOWER HOLE AT THE FRONT, set it to MAX negative camber.

Keep the stock bolt in the top and use the stock one to adjust the camber.

 

Rears you can either get Whiteline "KTA124" (front and rear lateral link set) for $540RRP or "KCA399" (bush kit, goes the the centre lateral link) for $111RRP.

Could also get Megan racing arm http://www.meganraci...d=1437&catid=97 (centre lateral link) for ~$250 landed here (need to use a re-shipper thou) - these are the same as Hardrace "6854" but work out cheaper landed here.

 

Hi, i got the front camber bolts all on and is perfect now. For the rears will the bushings be enough? Or Would I have to get the arm as well?

 

 

[bobbyjimmy]

Bushes should be enough to get the tyre's in.
If the car was low you'd need the arms.