Jump to content


Photo

Engine issues please help ( electrical/sensor)


  • Please log in to reply
4 replies to this topic

#1 DARNSKi

DARNSKi

    New Member

  • Members
  • Pip
  • 24 posts
  • Gender:Male
  • Location:campbelltown
  • Interests:custom fabrications, metal engineering, and spray painting

Posted 03 March 2014 - 08:39 AM

Hey got a 1995 subaru GX wagon phase2 engine 2,2L ok my car runs sweet here n there I drive it to work everyday winter and summer no problems.
When I drive up a steep hill and get to the top and then stop or stop at traffic lights my car all of a sudden has power and starts to idle ruff the tone of the engine goes deeper check engine light come on and eventually I have to pull over and turn of the car this problem also happens when I open her up a little driving in higher rpm then usual what could be the problem????

I've tried eliminating factors that contribute to this
Fuel service, spark plugs, leads coils , sensors maf,tps,cas,ips,eks
Like I said car drives perfect until a climb a hill and get engine problems has anyone had this before cheers

I have

#2 Morgan

Morgan

    ...jus waitin' 4 a m8

  • Members
  • PipPipPip
  • 25,485 posts
  • Gender:Male
  • Location:Central Coast
  • Interests:Taking a poo

Posted 03 March 2014 - 09:23 AM

Have you checked the code/s?


IM47Gcv.jpg


#3 DARNSKi

DARNSKi

    New Member

  • Members
  • Pip
  • 24 posts
  • Gender:Male
  • Location:campbelltown
  • Interests:custom fabrications, metal engineering, and spray painting

Posted 03 March 2014 - 11:21 AM

Nope as the check engine light will come on only when this occurs then when I turn it off it goes away if I plug it in with a scanner with out the check engine light on will the code still show up ???

#4 Robert

Robert

    Brappp

  • Members
  • PipPipPip
  • 9,419 posts
  • Gender:Male
  • Location:Central Coast, NSW
  • Interests:Door Frames

Posted 03 March 2014 - 11:34 AM

Depending on the scanner, you go into history codes.
It shows the codes that came up between the last ecu reset and now

#5 allpaw4

allpaw4

    Chief Sparky

  • Members
  • PipPipPip
  • 2,164 posts
  • Gender:Male
  • Location:Ararat
  • Interests:Cars, Stereos, Electrical

Posted 03 March 2014 - 12:28 PM

Instead of turning it off and restarting the engine, make it do it several times on the one engine start. That should cause it to actually log a code rather than just tell you there's a problem.

MY00 Red RX, a nice daily that was sold off once the B4 became reliable...
MY02 Blue B4, aka 'The Project' - v8 JDM STi engine package and assorted other 'goodies' - Sold, then bought back for parts. Stripped and crushed.
MY03 Blue RX, the newer old daily, pretty well more B4 than RX now... In the process of being converted to the track toy... Watch this space!
MY02 Silver Wagon, H6 conversion, full blue/black leather and almost full black interior to go with it. In process of being stripped and sold off.
MY03 White/Silver H6 Outback, donor car for silver waghoon. Scrapped.
MY97 Silver RX, acquired to become track car, but plans changed. Scrapped.

MY13 BRG, current daily, very nice to drive, small mods to make it even nicer again.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users