21 replies to this topic

[12.SLOW]

Yes I been told I can get someone to install on here but I would like.to know how to install one I would like to get rid of boost cut so one way valve can some one take.some pics n stuff thanks

[Jimbo]

can you wait till hooters next week and i can do it for you?

[Reevesy]

[Jimbo]

LOL that photo is of my old gen1 conversion!

Brad, you need to put the OWV in so the MAF sensor can read vacuum but not boost. So face the valve with the spring to the top and the plate at the bottom.

[Robert]

Don't you mean map sensor

[Jimbo]

Yeah that one!

Pensioner moment

[12.SLOW]

Hey guys that pic helped got it fitted fucken hectic 14 psi lol yeah yeah it's low but high for me

[12.SLOW]

I still hitting boost cut think my.cheap valve Shit lol will be getting a more heavy duty one

[Reevesy]

Sure it is installed the right way?

[Matty_Lib]

I've been using one suited for a fish tank that I picked up from a pet shop. Never had any trouble with it, highest its seen is 20psi. As Adrian said make sure you have it in the right way. 

[Reevesy]

But also cheap ones can have too weak a spring that can bend and not close properly

[Jimbo]

Yeah, along with Matty i also used a 50c petshop one. Never had a drama.

[12.SLOW]

using one way valve from pet barn came in a 2 pack so will change dirrection of it see if its that 

[Scuba-Roo]

Blow in one end. Make sure you have the valve the right way. Or that it isnt leaking

[Adam]

The arrow on the check valve should point towards the brown thing.

[12.SLOW]

i still get boost cut no matter what way valve is 

[Jimbo]

Put an STI ECU in it lol

[nickknack]

Replace it with a two way valve

[Cam.]

Boost cut is your ecu's way of saving your engine from having a bad time.

Being a series 1 gt with a td04 fitted, Set it to 11psi and forget.

[12.SLOW]

It's a stb motor but it's gt ecu