Jump to content


anark1

Member Since 16 Mar 2012
Offline Last Active May 12 2013 11:04 AM
-----

Topics I've Started

Subaru BRZ (auto)

09 December 2012 - 11:44 AM

gone and had a look at the megane 265 today and was impressed, but keep coming back wanting to own a brz/

now here lies the question i may get flamed for..

i wouldn't mind a change from a manual transmission on my turbo liberty.

is the Auto version of the BRZ good? i have requested a test drive so should be able to find out IRL shortly.

gearbox crossmember bushings.

23 November 2012 - 05:38 PM

im swapping my transmission mount over soon on my 1992 liberty rs.
is it worthwhile replacing the xmember bushings whilst im doing so?

perhaps using whiteline W0584(Yellow)

the gearbox mount i am using is the grop n unit.

redline shockproof oil

11 November 2012 - 11:19 AM

im currently running syntraxx 75/90 plus g70 nulon in my gearbox of my 92 liberty rs, have found that the synchros may be starting to go and lots of friends have recommended redline oil to help.

should i go superlight or lightweight ? 75/90 or 75/140?

im leaning towards the lightweight rather then the superlight.

alarm siren issues

08 October 2012 - 07:10 PM

for the 2nd time in 3 years, my mongoose siren has died.

i would like to see if perhaps a fellow mobile electronics member melbourne would mind having a once over/ talk about what could be going wrong.

36 months ago, alarm installed
18 months ago, siren dead,siren replaced,this fixed the issue.
last week, the siren died again Posted Image

now im unsure if just replacing the siren will fix the issue permanently.

i would like to confirm if it is inedeed the siren or if we have other issues at play.
and to perhaps also see if water ingress could be a part of the issue.


happy to compensate anyoe for their time.

my location is boronia.

clutch squeak

23 August 2012 - 06:26 PM

sounds like my clutch is squeaking occasionally, my thoughts were to put a small ammount of grease on the pivot points on the pedal.

is normal grease ok to use, and should the old grease be cleaned off (metho?) and then new grease added.

cheers guys.