I just had the KU36's.. they lasted me about 20-30k? Very noisy tires but a great dry tire and a pretty good wet tire. From memory the tread wear is rated at 180??
I've just fitted the new KU39 LE Sports, a step up from the 31's but behind the KU 36's with a tread wear of 280 . So far so good but I've only put about 20km on them lol
*They cost me 220 per tire fitted tho
- Suby Club
- → Viewing Profile: Posts: Winkles
Community Stats
- Group Members
- Active Posts 120
- Profile Views 3,730
- Member Title Hmm
- Age 37 years old
- Birthday December 10, 1986
-
Gender
Male
-
Location
Newcastle, NSW
-
Interests
Scuba Diving, Motorbikes, Cars
Posts I've Made
In Topic: Tyres for 18 x 7.5
06 September 2011 - 09:49 PM
In Topic: Reversing lights not working?
06 July 2011 - 03:56 PM
Cheers guys, I will see if I can sus something out for it
Be good to have reversing lights again, was a bit frustrating reversing in the dark lol
Be good to have reversing lights again, was a bit frustrating reversing in the dark lol
In Topic: Reversing lights not working?
06 July 2011 - 12:55 PM
Hey guys,
Sorry about the delay in this, I didn't get a chance to look at it for a while now with work and everything going on!
I did find the culprit as you can see in the attached picture...
Its located on the right hand side (drives side), just behind the plastic wall in the boot near the hinge for the boot lid.
Now if it had broken an inch or more outside of the connector I could fix it but I'm not sure how you fix when its broken off flush with the metal pin inside the white connector??? Can you some how pull the metal pin thing out of the connector and get a new one to replace it or is it best off to just send it to an auto elec to fix?
Cheers Jono
Sorry about the delay in this, I didn't get a chance to look at it for a while now with work and everything going on!
I did find the culprit as you can see in the attached picture...
Its located on the right hand side (drives side), just behind the plastic wall in the boot near the hinge for the boot lid.
Now if it had broken an inch or more outside of the connector I could fix it but I'm not sure how you fix when its broken off flush with the metal pin inside the white connector??? Can you some how pull the metal pin thing out of the connector and get a new one to replace it or is it best off to just send it to an auto elec to fix?
Cheers Jono