Hey guys, reckon you could help me out, I'm having some super frustrating issues with my b4, its engine cutting if i use more than quarter/third throttle at any rpm, even sometimes before boost kicks in so I'm thinking it's not over boosting.
Here's a video i recorded today to show ya
basically what happens is the engine cuts instantly and engine breaks until i ease off the pedal, then right back into full acceleration because it holds boost while engine breaking. Either that or it jerks uncontrollably until i clutch save it. The cars very dangerous to drive in this condition and it's put me at risk while overtaking before . engine cut seems to happen way easier the higher the car is in gear.
While i had the black plug under the dash connected to read my ODB codes i took the car for a drive and there was only one engine cut in second gear in like 10 mins of driving with a lot of full throttle, so now I'm really confused.
if it helps this is the vac line setup I'm using: 1cc1a3ed.jpg 157.3KB 9 downloads
Here are the error codes I've got
P1237
P1239
P1235
P0031
P1249
P0249
P0250
P1247
and its not the fuel pumps fault, I just installed a walbro 255, reset the ecu, still same codes as above.
Help would be greatly appreciated, i just want my suby to drive properly for once :'(
Cheers