Jump to content


GT_Tony

Member Since 01 Mar 2011
Offline Last Active Jun 19 2017 12:14 PM
-----

Posts I've Made

In Topic: Project Brat

13 May 2017 - 09:08 PM

Bump... ;-) 

 

IMG_20170423_175324_036_zpsualpm7tm.jpg

 

20170508_184234_zpscleyqmot.jpg

 

20170425_093259_zpshqbushqc.jpg


In Topic: Project Brat

03 August 2016 - 07:43 PM

geeezzz  6+ months since last update.. how SLACK of me.
 
ended up killing the carby on the EA81 buy running E91 ( in a brain fart moment put the cheap fuel in)
 
so started the EJ conversion,  bit by bit started ticking things off the list. rails and subframe modded, hydro clutch installed, new brake master
 
FB_IMG_1463287027806_zpshrar5mxr.jpg
 
ran another brumby "in" fuel line as my "return" line, made a box under the back that contains the lift pump, low pressure and high pressure filters, Bosch 044 and surge tank.  i sound deadned the insides of the box and foam mounted the pumps to keep the noise down.
 
20160515_153552_zpsvlycgly6.jpg
 
the last month or so have been working on the wiring loom for the turbo engine and tidying up different parts of the car
 
re-enforced mustache bar with Superpro bushes, FWD vortex sway bar (replaces the turbo RX rear swaybar i had in before)
 
3.9 rear diff, DCCD 5speed gearbox, shortened tailshaft and linkages etc,
 
THEN.  have been using the parents car while they have been touring Aus,  only to hear they are home bound (3 months early)  so now required the car to be finished sooner rather than later..  so ended up dropping in an EJ18 that i had sitting in the corner (this had previously been in a brumby, so the loom etc had already been done)
 
20160703_151558_zpsljofqqrp.jpg
 
another weekend should see it back together.. and hoping it has little to no teething issues
 
(exhaust/ alloy rad/ service on the missus SH)
 
20160619_155308_zpstqjwatr1.jpg