Simon's 1998 Gen 3 Legacy GTB
#1
Posted 29 March 2012 - 12:28 PM
Hey guys, its about time I did a build thread for my wagon. I've done a couple of mods lately & I have a few pic to throw up so enjoy.
Current mods:
18's Sti enkeis with newish zetum's (kumho ku27's)
Wrx 4 pot front front & 2 pot rear Calipers with Lucas TRW pads
DBA street slotted (the new T2 pattern) front & rear
Hella Braided brake lines front & rear
Lowered on Tein S tech springs (dropped about 40mm)
Cat back 2.5inch stainless steel exhaust with hiflow cat
X force MP02 rear muffler
Whiteline front strut brace
Whiteline 22mm front swaybar & hd end links
Whiteline 20mm Rear swaybar & ball joint end links
Cusco Rear strut brace
GFB response BOV
Turbosmart boost gauge
Sti gauge set
Sti peddle set
Prova short shifter
Fire extinguisher mounted to front passenger seat.
Clear side indicators
Tint on front and rear windows to match jap spec privacy tint
Waiting to go on:
Cusco H brace
planned mods are:
Repaint a couple of parts
New Headunit, Speakers & under seat subwoofer
Sti gear nob and matching redline boot.
A few pics below
Ps. A big thanks to Mark aka cruisn for his help with the brakes & new rims. As Im sure a lot of you know he is a good guy & his workmanship is second to none. Thanks mate.
P1010020.JPG 95.58KB 16 downloads
P1010021.JPG 104.05KB 6 downloads
P1010022.JPG 128.69KB 5 downloads
P1010024.JPG 136.37KB 5 downloads
P1010025.JPG 126.16KB 6 downloads
P1010026.JPG 86.83KB 5 downloads
P1010027.JPG 111.5KB 5 downloads
P1010028.JPG 99.43KB 5 downloads
#2
Posted 29 March 2012 - 12:31 PM
Love it!
One small thing, chuck some number plate protectors on. Tidies it up a bit
#3
Posted 29 March 2012 - 12:37 PM
in japan before a trip on a boat
1 front right.jpg 57.84KB 4 downloads
with gen4 gt wheels
rsz_p1000552.jpg 146.26KB 6 downloads
& Now
P1010021.JPG 104.05KB 4 downloads
Shit yeah!
Love it!
One small thing, chuck some number plate protectors on. Tidies it up a bit
thanks bud
i think your right, trip to super cheap tomorrow.
#4
Posted 29 March 2012 - 12:44 PM
Also, I dont like numebr plate protectors, I rekon they're ugly, and collect leaves and worse, dust...
Great car!
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#5
Posted 29 March 2012 - 12:45 PM
#6
Posted 29 March 2012 - 12:51 PM
Hey mate are you located in Shoal Haven Heads? I was visiting my Gparents about 2 weeks ago there, maybe 4 and drove by what looked exactly like yours, even took a picture! It had different plates though, yellow with _ _-67-_E (What i can make out from the picture lol)
Thanks bud
yeah yeah shoaly heads that would have been me haha
finally got my plates back off my dads work van. def getting some covers the plates are in pretty shitty condition.
#8
Posted 29 March 2012 - 01:05 PM
i like the numberplate protectors, IMO it shows you want to look after the car, but maybe thats just me.
the drop dont look 40mm but looks good
#9
Posted 29 March 2012 - 01:29 PM
#10
Posted 29 March 2012 - 05:45 PM
#11
Posted 29 March 2012 - 06:02 PM
Brakes and wheels look the shiz.
OEM+
#12
Posted 29 March 2012 - 06:20 PM
#13
Posted 29 March 2012 - 09:04 PM
#14
Posted 29 March 2012 - 09:46 PM
#15
Posted 29 March 2012 - 10:45 PM
How do you find the MP02, I have one here but haven't fitted it. The inlet appears to be 3" on the MP02 yet you say you went 2.5" catback? I am a little worried that its too big, and that fitting it might throw out my standard tune and be too loud...
Its 2inch stock piping! I have 3inch catback into a fujitsubo 3inch muffler inlet and no worries here.
#16
Posted 29 March 2012 - 10:55 PM
I'd prefer a fujitsubo or something along those lines haha. But then it is just sitting here waiting. I'd like to hear a sound clip of this GTB if possible
#17
Posted 30 March 2012 - 02:26 AM
MY00 Red RX, a nice daily that was sold off once the B4 became reliable...
MY02 Blue B4, aka 'The Project' - v8 JDM STi engine package and assorted other 'goodies' - Sold, then bought back for parts. Stripped and crushed.
MY03 Blue RX, the newer old daily, pretty well more B4 than RX now... In the process of being converted to the track toy... Watch this space!
MY02 Silver Wagon, H6 conversion, full blue/black leather and almost full black interior to go with it.
MY03 White/Silver H6 Outback, donor car for silver waghoon.
MY97 Silver RX, acquired to become track car, but plans changed. To be stripped and scrapped in time.
#18
Posted 30 March 2012 - 06:03 AM
The wheels look porn. The brakes compliment them well!
Enjoy mate! She's a beautiful car!!
#19
Posted 30 March 2012 - 09:14 AM
Perefect looking Gen3 Legacy Simon.
Brakes and wheels look the shiz.
Im super stoked mate thanks for your help.
How do you find the MP02, I have one here but haven't fitted it. The inlet appears to be 3" on the MP02 yet you say you went 2.5" catback? I am a little worried that its too big, and that fitting it might throw out my standard tune and be too loud... lol. Mark helped me out with the wheels I love those ones, they look great on Silver or White.
hey tsg I like the mp02 it gives a nice note not overly loud. Im pretty sure & dont quote me but the standard piping looks alittle smaller than 2.5inch like....2.25. but i havent had a problem with my tune or how it runs with my cat back, yours will be fine. The only problem i had with the muff is that i had to get the tip extended due to how the wagon is setup. The exhaust shop just chopped the tip off & welded a extension piece in.
IMG_0158.jpg 1.53MB 2 downloads
sorry for the shitty iphone pic
#20
Posted 30 March 2012 - 09:19 AM
Looks great, love the brakes. Wish I had some cash to put into mine. Which endlinks are you going with? The Legacy has metal endlinks already.
Yeah bigwillie ive gone the whiteline KLC30, the standard ones are metal but just dont look super strong..... i think ive read somewhere you run cusco swaybars?? are you using the standard links??
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users