7669 replies to this topic

[Zac]

Well if so, severe lack of Bikini's... they were doing guy scenes.

I assume you mean lack of bewbs...

[Zac]

Hey guys, pedders any good for wheels balance and alignment?

[B4TT]

Hahahahaah the boss of another department here who shares this office is running interviews today for a new job role, the next candidate to come in apparently is interesting as in his phone interview he said that the reason he left his last job is because "He got sick of working in a female dominated environment" hahahahahahaha....... needless to say the boss of the position he is going for who is the the person that will be interviewing him is female.... she is going to put him on the spot about the comment for laugh. I want to hear his response!

[Samwise]

Hey guys, pedders any good for wheels balance and alignment?

AFAIK Pedders Moorebank is pretty good with Subaru's. But apart from that, wouldn't know.

[skillionaire]

@Josh: Booked in for a few weeks time...  

[B4TT]

@Josh: Booked in for a few weeks time...

Hahaha Brilliant!!

[Adam]

Haha whoops!!!

The foreman here was right pissed off today. Words were going to be exchanged between him and the boss!

He got docked 15mins pay because he was late. Fair enough. EXCEPT. He came in on Saturday, an painted a truck. For no pay.

Fucking dickhead boss and his moronic tar everyone with the same rules bullshit!

[Zac]

AFAIK Pedders Moorebank is pretty good with Subaru's. But apart from that, wouldn't know.

Thanks man, I think I'll book in with these guys at Penrith and see how I go...

 

Getting the exhaust installed on Saturday too... Around $95, but oh well, should be better than the cannon I have now...

[skillionaire]

Hahaha Brilliant!!

 

Should have got some photos! Next time!

[Samwise]

Getting the exhaust installed on Saturday too... Around $95, but oh well, should be better than the cannon I have now...

 

That's not too bad. All the places I got quoted to hook that Gen 2 X-force muffler I had up, were at least double that.

[Adam]

Glad to hear you found someone, Zac!

[B4TT]

 

Should have got some photos! Next time!

Hehehehehe.

[Zac]

 

That's not too bad. All the places I got quoted to hook that Gen 2 X-force muffler I had up, were at least double that.

 

 

Glad to hear you found someone, Zac!

True... but this guy hasn't seen what he has to do yet, tried to explain it as best I could over the phone... but yeah, he knows he has to chop the inlet quite a but and make up some stuff to connect the 3" exhaust to the 2.5" inlet on the exhaust. Hopefully he can do it.

 

Just called the guy I went to before who said it can't be done, and he now said he can do it, if he chops the inlet pipe and does some adaptor for 3" to 2.5" and he said it could be around $80 to $100, depending on how long it takes...

 

Liberty rear suspension and B4 rear suspension are different, which is why the exhaust pipe after the inlet is bent so much, which is why the Liberty exhaust inlet won't fit straight on... so has to be chopped and the hangers have to be modified too obviously...

 

We'll see how it goes...

[Samwise]

 

Liberty rear suspension and B4 rear suspension are different, which is why the exhaust pipe after the inlet is bent so much, which is why the Liberty exhaust inlet won't fit straight on... so has to be chopped and the hangers have to be modified too obviously...

 

I think you mean Gen 2 to Gen 3...

 

Gen 3's are pretty much all the same..(?)

Only difference is some front stuff is modified for the dump piping.

So front sway bars and stuff aren't interchangeable.

[B4TT]

Julia Gillard will be the first prime minister to receive a salary above $500,000, with an extra $11,908 taking her wage to $507,338.

As of July 1.

[Scuba-Roo]

Don't think it would..... Does the v8 have a smaller chassis? Or smaller blind spots?

Nope, but when you drive a v8 you just dont 2 fucks


Fuck yeah started making parts for an engine stand today, found some wheels at work, got some pipe for the swivel. Just gotta machine a bit down tomorrow. I've got a handle somewhere at work, and a boiler maker tomorrow is gonna plasma cut me out the face place and some mounting brackets. Hopefully i can get this frame cut out and tack welded tonight

[Zac]

 

I think you mean Gen 2 to Gen 3...

 

Gen 3's are pretty much all the same..(?)

Only difference is some front stuff is modified for the dump piping.

So front sway bars and stuff aren't interchangeable.

I hven't been under a Gen2, so I have no idea what it looks like under there, but they were showing me where on the Gen3 B4 that the exhaust takes a sudden sharp turn around the rear suspension on the B4, and they said on a normal Liberty, it wouldn't have that sharp turn, so the exhaust would be easier to fit on a non-B4... either way, I'm taking it down on Saturday morning to see what the dude can do and hopefully it will get fitted once and for all...

 

Its funny... coz I have the stock dumps going into the stock cat, I'm guessing its stock, then into a 3" pipe to the muffler now... and when I change it to the 2.5", it will be 3" pipe to 2.5" muffler... wonder what that will do...

[Samwise]

[Zac]

For some reason, I can picture Shaz there, in his jacket, boardies and thongs, walking around the bank saying that...

[B4TT]

Going to red oak for some beer... Fuck yeah.