This topic is lockedHe will be os by then.
10084 replies to this topic
#4561
Adam
-
- Members
-
- 46970 posts
Snack down!
- Gender:Male
- Location:Bargo
- Interests:Not knowing things about stuff
Posted 14 May 2014 - 06:53 PM
#4562
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 06:55 PM
I know, spewing. I can get my mate from slam.poke.tuck.dope.
I will leave you guys for a bit with these:
Dirty car was cleaned straight after. Try and imagine tyres around them too as they're 17x8. The only thing I DIDN'T like about them was the offset; they sit about 2 cm. I think that's way too much poke for me.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4563
Bumpty
-
- Members
-
- 5489 posts
My wob dreams are now wet dreams
- Gender:Female
- Location:Hoga Island
- Interests:Drinking wine with wob by the legacy side
Posted 14 May 2014 - 07:04 PM
I know, spewing. I can get my mate from slam.poke.tuck.dope.
I will leave you guys for a bit with these:
Dirty car was cleaned straight after. Try and imagine tyres around them too as they're 17x8. The only thing I DIDN'T like about them was the offset; they sit about 2 cm. I think that's way too much poke for me.
And skid vids with the rims on?
#4564
Adam
-
- Members
-
- 46970 posts
Snack down!
- Gender:Male
- Location:Bargo
- Interests:Not knowing things about stuff
Posted 14 May 2014 - 07:12 PM
Sucks about the offset.
Needs more low.
#4565
RX25SE
-
- Members
-
- 12757 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 14 May 2014 - 07:13 PM
I will leave you guys for a bit with these:
pics of jack stands not loading.........
wow, I'm 60 pages behind. So slack.
If I told you I was a compulsive liar, would you believe me?
#4566
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:17 PM
I didn't do the test fit at my house otherwise they'd be used. I had my wheel underneath a little further to the right though for safety. 
Sucks about the offset.
Needs more low.
Exactly, otherwise I'd get them straight away.
That is getting fixed very soon. 
I'll get more pics of them on soon as my mate decided to store them at my place.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4567
Bumpty
-
- Members
-
- 5489 posts
My wob dreams are now wet dreams
- Gender:Female
- Location:Hoga Island
- Interests:Drinking wine with wob by the legacy side
Posted 14 May 2014 - 07:18 PM
I'm 60 in front.!
#4568
Adam
-
- Members
-
- 46970 posts
Snack down!
- Gender:Male
- Location:Bargo
- Interests:Not knowing things about stuff
Posted 14 May 2014 - 07:22 PM
Those brake disks look awesome too.
Really wish i had some cash to throw at my automobile!
#4569
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:24 PM
+1. One of the best upgrades I've done. Next on the list for brake-related mods are braided lines, but I've got a few items on the mod list holding higher priority.
I got these for $320 man, front and back.
I've gotta give my struts a clean! They look shocking!
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4570
Adam
-
- Members
-
- 46970 posts
Snack down!
- Gender:Male
- Location:Bargo
- Interests:Not knowing things about stuff
Posted 14 May 2014 - 07:25 PM
good price. But my disks work atm so they aren't a priority
#4571
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:26 PM
Fair enough.
I am under the impression that Shaz doesn't do tinting any more, correct?
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4572
Adam
-
- Members
-
- 46970 posts
Snack down!
- Gender:Male
- Location:Bargo
- Interests:Not knowing things about stuff
Posted 14 May 2014 - 07:28 PM
Don't think so. Best to ask him
#4573
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:31 PM
I have. He hasn't replied to my lengthy private message. 
I'm quite sure he's done with it though. I need to find somewhere that uses the good 3M stuff. The cheapest quotes I've got are for SunTek film.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4574
Robert
-
- Members
-
- 9419 posts
Brappp
- Gender:Male
- Location:Central Coast, NSW
- Interests:Door Frames
Posted 14 May 2014 - 07:31 PM
Braided lines are worth it!
Firmer brake pedal for sure
Firmer brake pedal for sure
#4575
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:33 PM
Well that's the only thing I'll need to perfect my braking. I've already got new brake discs, new pads and a master cylinder brake stopper. Braided lines are the only missing bits.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4576
Robert
-
- Members
-
- 9419 posts
Brappp
- Gender:Male
- Location:Central Coast, NSW
- Interests:Door Frames
Posted 14 May 2014 - 07:34 PM
Yeah that will be perfect!
All I need is the master cylinder stopper and to actually install the callipers and rotors
All I need is the master cylinder stopper and to actually install the callipers and rotors
#4577
Liberty
-
- Members
-
- 23872 posts
Regular Member
- Gender:Male
- Location:Sydney
- Interests:tl;dr
Posted 14 May 2014 - 07:35 PM
You won't regret it man. I know it works. It just can't be done up TOO tight, and obviously too loose.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#4578
Robert
-
- Members
-
- 9419 posts
Brappp
- Gender:Male
- Location:Central Coast, NSW
- Interests:Door Frames
Posted 14 May 2014 - 07:35 PM
It's under 200 bucks from hel for the lines
You can choose the colour
It pushes the pedal right up if you do it too tight right?
You can choose the colour
It pushes the pedal right up if you do it too tight right?
#4579
Guest_KONG_*
Guest_KONG_*
-
- Guests
Posted 14 May 2014 - 07:40 PM
I know, spewing. I can get my mate from slam.poke.tuck.dope.
I will leave you guys for a bit with these:
Dirty car was cleaned straight after. Try and imagine tyres around them too as they're 17x8. The only thing I DIDN'T like about them was the offset; they sit about 2 cm. I think that's way too much poke for me.
YES!!!!!!!!!!!!!!!!!!!!!!
Also tagged with one or more of these keywords: GT, May the force be with you
Suby Club Community →
General Discussion →
Gen V Liberty GT Premium 2010 Auto Transmission IssuesStarted by Timbo Slice, 01 Oct 2017  gen v, 2010, liberty, gt and 1 more...
|
|
|
||
 |
Suby Club Community →
Anything Goes →
July GT - The mid winter GTStarted by RX25SE, 03 Jul 2017 winter, cold, bad weather, rain and 5 more...
|
|
|
|
|
|
Suby Club Community →
Anything Goes →
GT de JuneStarted by Liberty, 01 Jun 2017 june, gt, general topic
|
|
|
|
|
|
Suby Club Community →
Anything Goes →
May Day GTStarted by Liberty, 08 May 2017 may, gt, hvc
|
|
|
|
|
|
Suby Club Community →
Anything Goes →
April Fooled GTStarted by Liberty, 03 Apr 2017 april, gt
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
