Show us your gauges
#1
Posted 11 January 2015 - 01:28 PM
Just thought it would make for an interesting topic to show off and talk about what gauges and brands you have and why. Or even ones you wish you had.
image.jpg 102KB 9 downloads
As for me I'm looking at getting Boost, A/f, Oil pressure and Egt. Not sure on brands.
My bad if this has been done but I couldn't find one.
#2
Posted 11 January 2015 - 02:57 PM
I have all AEM guages for Boost(is also a boost controller), A/F, and oil pressure. No pics of an install as they aren't yet. But havent heard a bad word about them yet, Available from http://www.prospeedr...ge{47}Wideband/
#3
Posted 11 January 2015 - 03:12 PM
52mm Prosort Halo:boost-oil,water temp ATI gauge pod and AEM AFR, JCS PILLAR POD
10929032_10204818897088957_5165881117058142553_n.jpg 33.64KB 9 downloads
10417082_10203166009487800_1008513442_n.jpg 73.21KB 9 downloads
#4
Posted 11 January 2015 - 06:39 PM
In the foz i've got a Zero Sports center gauge pod with Defi Link Boost, Oil Pressure and Temp.
Currently in my lib i've got some weird molded center pod with Autometer Digital LED Water temp, Oil Pressure and Oil Temp and a corner pod with a Turbosmart Boost Gauge.
(sorry shitty pic but you can see the centre pod back there just lol)
BUT I'm getting rid of that whole set up around to it. I've alread got a Defi Din Gauge set with Water temp, Oil Pressure and Oil Temp to go in the upper din slot and a defi racer boost gauge which i'm just going to mount in a cup in the corner/pillar location
#5
Posted 11 January 2015 - 07:23 PM
#6
Posted 11 January 2015 - 08:57 PM
argi those Prosport gauges look good. And they're a lot less expensive than a triple Defi setup. And they're BF too?
aek does Defi add anything else or do you pay for the brandname?
PS. Krypton great idea for a thread :thumb: I have a triple-gauge pod arriving from JP in a week or two
"Installation is the reverse of the removal procedure."
BH9 02-05 / BD9 07-14 / BE5 14-> / GGA 18->
2001 Legacy B4-RSK / 1999 ZX-9R C2
#7
Posted 11 January 2015 - 08:58 PM
I checked the specs on an eBay din slot and it wouldn't fit
If they fit I'd like one too
#8
Posted 11 January 2015 - 09:34 PM
argi those Prosport gauges look good. And they're a lot less expensive than a triple Defi setup. And they're BF too?
aek does Defi add anything else or do you pay for the brandname?
PS. Krypton great idea for a thread :thumb: I have a triple-gauge pod arriving from JP in a week or two
yeah they r cheaper they cost me less then$300 3 gauges.They each come with a small pad to adjust: colour(amber,blue.white) warning,peak,brightness.dimmer,mute....
heres a video prosport halo gauges
#9
Posted 11 January 2015 - 09:52 PM
How come you're running oil water temp and oil pressure. And not an a/f. Why doesn't anybody run a Egt? Wouldn't mind hearing why one would be better than the other. Just would be good to know so I can make a better decision on what I'm picking.
Plenty of good arguments for both wideband or EGT. the reason i don't is i only have room for so many gauges and consider the ones i've got fine. My Forester is lightly modified on a mild tune so i'm honestly not to concerned about it. i really don't need any gauges on it but the one i wanted most was oil pressure just in case. Oil Pressure saved Andy recently where one of his oil cooler lines ruptured after rubbing on the control arm and was dumping oil on the freeway. the rear of his car was covered in oil but at 110kms he didn't notice his gauge dropped and he stopped to see what was up.
If i want to know how rich my cars running i just look in the rear view mirror when i get on the loud pedal
I'll probably get a wideband for my Liberty at some point
argi those Prosport gauges look good. And they're a lot less expensive than a triple Defi setup. And they're BF too?
aek does Defi add anything else or do you pay for the brandname?
i'm sure its a bit of both. i can't comment on prosport as i've never had them (imo just by looking at them you can tell why they're $100 a throw and cheaper that say defi's) but i've got autometer in my liberty and they're absolute garbage. they look cheap and aren't entirely accurate so i'm happy to pay for defi. i don't think its so much just paying for a "brand name" but paying for a brand name i TRUST.
Aek you sure those din pods fit the gen 2?
haha i hope so. i haven't tried to fit it yet but it says its for GD Subaru.
#10
Posted 11 January 2015 - 09:57 PM
Isnt a DIN space a standardised measurement?
#12
Posted 11 January 2015 - 10:04 PM
it should be. Robs a bit special mind you..
#13
Posted 11 January 2015 - 10:06 PM
But the dash plastics make the hole physically smaller
#14
Posted 11 January 2015 - 10:10 PM
i tried to do a dodgy ebc mount install so my plastic sleeve/shelves have been removed (and ruined). no problemo
i gotta try and do the ashtray install for my eBoost Street like Alex had in his legacy
#15
Posted 11 January 2015 - 10:16 PM
Could turn out awesome or really shit!
#16
Posted 11 January 2015 - 10:19 PM
Ah yes the din slot is standardised
But the dash plastics make the hole physically smaller
Nothing a dremel cant fix
#18
Posted 11 January 2015 - 10:23 PM
The little flip up lid
Some cars just have the pocket there, no lid
#19
Posted 11 January 2015 - 10:28 PM
ah so thats what thats for?? i just thought it was another change compartment. In my legacy i mounted my Blitz SBC in there which was cool as i could just close the lid and hide it if i needed to
#20
Posted 11 January 2015 - 10:28 PM
Its meant to be lined with suede stuff but it turns to brown crud after 15 years haha
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users