Rob's 98 gen 2 Heritage
#321
Posted 28 January 2017 - 09:27 PM
Installed a gd 2 core rad with mishimoto fan shroud
Running Evans waterless coolant now, bit unsure on this as the car is running hotter but from the research I've done it seems to be normal so I'll just keep an eye on it.
Sent the ecu away to have the tps circuit upgraded as I was having signal issues, they did some other updates while it was in repair.
Also got a pillar gauge pod for my defi gauges, not sure about this one too as it's bit of a cop magnet
Also picked up a dccd 6 speed
Just gathering the other bits requred now
Its from an 05 sti
Will be putting a helical r180 in at the same time
Wanted a plated r180 like what I have now but this was part of the deal
#322
Posted 28 January 2017 - 09:35 PM
Is there any way of swapping the plated centre into your new diff?
Surely the ring gear is bolted to it
#323
Posted 28 January 2017 - 09:44 PM
Too much...
worth more in parts than whole
I think ill just sell the plated one to recoup costs
I reckon it could be swapped over, but going to cost more again
#324
Posted 29 January 2017 - 08:12 PM
So much luxury
#325
Posted 29 January 2017 - 08:33 PM
#326
Posted 29 January 2017 - 09:30 PM
#327
Posted 30 January 2017 - 08:19 AM
#328
Posted 30 January 2017 - 08:23 AM
I have a 6 speed and can confirm Adam's statement.
#329
Posted 12 February 2017 - 06:41 PM
Nice Rob, I would love a 6 speed one day...
#330
Posted 26 February 2017 - 10:51 PM
I have a 6 speed and
it's missing the front diff
#331
Posted 27 February 2017 - 09:46 AM
#332
Posted 20 March 2017 - 04:26 PM
We must cruise soon!!
Talk in another 12 months lol
Oh...and 6 speed...nomness x9000!!!
#333
Posted 11 April 2017 - 07:52 PM
Everything in my Pickled Pillow Monster Club agree that this is one SEXYES SUBY DOOPER DOOPY DOO!
#334
Posted 12 April 2017 - 11:02 AM
Everything in my Pickled Pillow Monster Club agree that this is one SEXYES SUBY DOOPER DOOPY DOO!
Awww yisssss! Bumpty is out on parole.
#335
Posted 12 April 2017 - 06:15 PM
#336
Posted 31 May 2017 - 07:13 PM
Gd to gen 2 loom
Sti ecu
New injectors
Walbro 460
Frozen boost W2A setup
Gd sti slave and master with HEL braided line
Headers coated
Dump wrapped
Updated my mod list to the current/planned setup
Mechanical bits
05 EJ207
V8 sti jdm ecu
Id1050x injectors
3MM grimnspeed manifold spacers
Throttle body Coolant line mod
GT PUMPS Gtps02-712
PSR turbo inlet
Process west 72mm cai
05 sti 6 speed gearbox (DCCD)
3.9 Torsten r180 rear diff
Sti clutch master and slave with a HEL braided line
Erry bush in the driveline replaced with harder material
Stage 2 mantic single plate clutch
Al spec GD sti to rx loom
3 inch bellmouth xforce dump pipe
3 inch Xforce mid pipe with resonator
High flow cat
Mrt 3 inch muffler
Walbro 460 Fuel Pump hardwired
PSR el headers (coated)
Kartboy pitch stop
Frozen boost water to air setup
Handling
Full brembo setup front to back
BC BR Fully Adjustable Coilovers
STI Carbon Fibre Strut Brace
GDB front control arms
Whiteline front control arm bush
Whiteline anti lift kit with castor mod
Whiteline roll centre kit
Ball joints- tie rod ends
Mines 4 point h brace
Spec c steering rack, 2.2 turn- brand new rack ends
Whiteline steering rack bushes
Hardrace rear adjustable arms
Also managed to shoe horn a ati pod into my dash
Needs a bit more adjusting but Looks ok
#337
Posted 31 May 2017 - 07:29 PM
I'm interested to see the W2A setup in action. I looked into going that way when I did my swap but I would've been overkill for my relatively mild setup.
Where you getting AC heat soak on hot days with the front mount?
#338
Posted 31 May 2017 - 10:56 PM
Can confirm skitz as car
Give us ya fmic piping tho
#339
Posted 01 June 2017 - 05:37 AM
OEM+
#340
Posted 01 June 2017 - 06:28 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users