Love the STi shift trim. One day ill get one for my car
Yeah have liked them since I saw it on Matt's RS
Posted 13 September 2017 - 03:56 PM
Love the STi shift trim. One day ill get one for my car
Yeah have liked them since I saw it on Matt's RS
Posted 24 September 2017 - 01:12 PM
Well things just got a little bit interesting....
I have got my hands on a version 8 STI 207...
It is something that I always wanted to put in the RS, but i wasn't sure it would happen so quickly...
It popped up at a pretty good price and I thought why not...
It came with the front and rear harnesses, as well as the steering column and key plus the a AUS ecu, fuel controller, pretty much everything for the conversion...
Still undecided to get a JDM ecu to make it easier so i don't need the key and immobiliser...
Anyway here is a little pic....
IMG_2604.JPG 173.03KB 2 downloads
It not going you be a super fast conversion but it will get there.....
Posted 24 September 2017 - 02:14 PM
Mad. Aussie or jap engine?
Posted 24 September 2017 - 02:57 PM
Thanks Barbbachello.....
It is a ADM engine....
Posted 24 September 2017 - 06:00 PM
Epic stuff man, I bet it will transform the car!
Posted 24 September 2017 - 09:56 PM
Very cool moto. Was that from Simon? I was eyeing that off but $$poor.
"Installation is the reverse of the removal procedure."
BH9 02-05 / BD9 07-14 / BE5 14-> / GGA 18->
2001 Legacy B4-RSK / 1999 ZX-9R C2
Posted 25 September 2017 - 09:06 AM
Epic stuff man, I bet it will transform the car!Thanks mate
Thanks mate, I can't wait to get it all in....
Thinking about a 6 speed as well......
Very cool moto. Was that from Simon? I was eyeing that off but $$poor.
Yeah it was from Simon...
I thought why not it is nice and close and I have always wanted a 207.....
Posted 06 August 2018 - 08:54 AM
Well it has been awhile since i have been in here...
Been a bit quiet on the RS front....
Haven't done much with the 207, just finally started to get back into it and got onto my 4/2 pot brake reurb...
I will get some pics up when i'm done....
Posted 13 November 2018 - 06:12 PM
So i was just checking out Miguel's thread and thought id just post up a little update...
So I had had some 4/2 Pots there for awhile now and I have finally got round to giving them a sandblast and a new coat of paint....
I have always been a bit of a Kawasaki fan so I thought I would do them Kawasaki green I think they came out awesome....
IMG_2917.jpeg 229.26KB 4 downloads
IMG_2932.jpeg 186KB 4 downloads
IMG_2934.jpeg 152.56KB 4 downloads
IMG_2935.jpeg 150.2KB 4 downloads
While I was at it I also had some alloy front control arms, so i attacked them with some steel wool and then added some clear over the top.
They also got some Hard Race STI bushes pressed into them as well...
IMG_2970.jpeg 212.11KB 4 downloads
And finally for this update I got my hands on a leather centre console lid, It is some much nicer....
IMG_2964.jpeg 157.99KB 4 downloads
Posted 13 November 2018 - 09:28 PM
Posted 16 November 2018 - 07:32 AM
Awesome work.
I have to do the same with my 4 pots, love the green!!! I'm thinking of a gloss black or that BMW blue.
Thanks mate...
Really happy with how they turned out...
I really like that blue as well I think it would look sweet....
Posted 16 November 2018 - 01:49 PM
Looks great, nice paint job on the brakes. Any pics on the car?
Posted 16 November 2018 - 02:12 PM
Great job on the calipers. Any tips for masking up the pistons? Ive gotta do my brembos at some point
Posted 16 November 2018 - 02:45 PM
Looks great, nice paint job on the brakes. Any pics on the car?
Thanks, not on yet just got to grab some new rotors and pads
Great job on the calipers. Any tips for masking up the pistons? Ive gotta do my brembos at some point
Thanks mate...
I removed my pistons and tapped over the hole (Crusin's old thread gave me some ideas)...
Went to Bunnings and got a O-ring kit that would do the job and then put it over the tape, as i was doing a seal kit as well...
But I reckon it would still work with the pistons in as well,
Posted 16 November 2018 - 02:53 PM
Thanks, not on yet just got to grab some new rotors and pads
Thanks mate...
I removed my pistons and tapped over the hole (Crusin's old thread gave me some ideas)...
Went to Bunnings and got a O-ring kit that would do the job and then put it over the tape, as i was doing a seal kit as well...
But I reckon it would still work with the pistons in as well,
Ah ok. Mine have already been freshly rebuilt so dont want to pull them apart for no reason. Will just get creative with the tape
Posted 16 November 2018 - 03:29 PM
Ah ok. Mine have already been freshly rebuilt so dont want to pull them apart for no reason. Will just get creative with the tape
No worries what colour are you thinking....
Posted 16 November 2018 - 03:38 PM
No worries what colour are you thinking....
Probably just a classic red. Should pop nicely against white wheels on white car
Posted 16 November 2018 - 03:40 PM
Probably just a classic red. Should pop nicely against white wheels on white car
Nice your doing a great job on the whole car it's going to look sweet...
Posted 17 November 2018 - 08:24 AM
Posted 17 November 2018 - 11:11 AM
Free bump above the spam threads!
Good work on the calipers, reminds me of the hulk - which I guess you want on your brakes
Cheers
Bennie
Thanks Bennie how is your RS looking...
I still have those RS rim if you still want them....
0 members, 0 guests, 0 anonymous users