Scrappy Coco the 2nd! Disc0 Disc0
Posted 18 February 2016 - 11:45 PM
Placeholder for my Liberty GT Spec B build.
I've been too busy at life and it has been 2 years and I have yet to take a photo of my black nugget Liberty.
For now its full standard factory. It has an aftermarket Gopher full alloy radiator and custom ground wiring kit, Will C spec.
It also has a custom ecu tune making DBW alot more driver friendly, increased boost.
New addition installed AFM and boost gauge. 
20160313_184205.jpg 102.49KB
6 downloads
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
Regular Member
Posted 19 February 2016 - 05:46 AM
Gotta love Gen IV's. Can't wait to see the write up. 
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
Differential Studios
Posted 19 February 2016 - 07:06 AM
Haha mad plates lad eshhhh.
Pics pls m8
I put up with people from amnesty, red cross and now the cancer council almost daily hounding me!! Throw in the greens, green peace, unhcr, save the forking children and I've well and truly hit my limit for the number of fuckstains wanting me to sign something or give money. Seriously cubts,right off.
Regular Member
Posted 19 February 2016 - 07:51 AM
Gotta love Gen IV's. Can't wait to see the write up.
As if thats gonna happen 
Guest_KONG_*
Posted 19 February 2016 - 08:22 AM
Scrappy Coco the 2nd! Disc0 Disc0
Posted 19 February 2016 - 08:43 AM
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
Livin' the Legacy
Posted 21 February 2016 - 08:58 PM
SUPPPPPLAAAAD!
'04 Liberty GT Premium "The Sprog Chariot"
My wob dreams are now wet dreams
Posted 22 February 2016 - 08:28 PM
Scrappy Coco the 2nd! Disc0 Disc0
Posted 23 February 2016 - 08:38 AM
So had a major lose this weekend.
1. Went to check out a from what I was told was a Xorce Liberty GT 3" Cat back exhaust all the way out at Tumut NSW, roughly a 4 hour drive from my house. This turned out bad as the guy got his numbers wrong after confirming with me it was a 3" it was only a 2.5". I was pretty peeved.
2. Was hoping to get a set of STI V7 head which wasn't too good. Got them but they're not usable, ....at least it'll help with research.
Garage 改善
Posted 24 February 2016 - 06:27 PM
Wow. Eight hour waste of time. Sucks when it makes you mad but there's nothing you can do except take it
"Installation is the reverse of the removal procedure."
BH9 02-05 / BD9 07-14 / BE5 14-> / GGA 18->
2001 Legacy B4-RSK / 1999 ZX-9R C2
Scrappy Coco the 2nd! Disc0 Disc0
Posted 26 February 2016 - 01:54 PM
Update. So Still no photos. But I did manage to pick up an epic catback exhaust from Nigel Squires!!!! What a champ and talked phat Subaru Bits for a bit too. 
Cheering heaps. All thats left is to hunt around for a dump and/or maybe have a cat put on the one I grabbed off him too then I can put my wideband o2 sensor and to finally be able to push the PH@T boost on my TBSTI with the mishmoto intercooler and hopefully AVO Turboworld airbox with unrestricted pod filter.
Then it'll really be A Liberty GT Special Edition TBWC
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
Almost gen2 time.
Posted 28 February 2016 - 03:53 AM
Hey Will,
Best build thread ever.
Seriously it sucks, walk out your door and take a photo of your nugget !! Far out.
Scrappy Coco the 2nd! Disc0 Disc0
Posted 08 March 2016 - 06:55 AM
Mate ahh dylan you are epic jelly thats all.
Anyhow was a busy weekend. Ended up fitting the turbo back exhaust, couldn't get a pic of under the car but managed to grab these
20160305_182248.jpg 121.06KB
10 downloads
post-203-0-74340100-1457386081.jpg 388.39KB
13 downloads
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
Scrappy Coco the 2nd! Disc0 Disc0
Posted 08 March 2016 - 07:20 AM
Can't make photo the right way around wtf... well edited .. turned out potato mode but yeah, Interduder is on, Turbrras back exhaust is on. Wideband 02/Turbo Boost gauge is half on. Boosting it to somewhere near 18 psi-ish right now with custom tune.
Car right now feels really strong like its pulling about 170ish but its running rich due to the maf being out since the upgrades. I'll be getting the wideband o2 on then I can log some info to correct me air flow issues.
Edit again.... I remember when buying this mishmoto unit they said the engine cover goes backon.... FYI it doesn't go on with the strut brace there, doesn't clear it at all.
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
New Member
Posted 08 March 2016 - 12:00 PM
Scrappy Coco the 2nd! Disc0 Disc0
Posted 08 March 2016 - 07:08 PM
The guy doesn't know what a phone is for.. or how to pick it up.
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
New Member
Posted 09 March 2016 - 07:58 PM
New Member
Posted 12 March 2016 - 08:27 AM
My wob dreams are now wet dreams
Posted 12 March 2016 - 05:33 PM
...managed to grab these
Scrappy Coco the 2nd! Disc0 Disc0
Posted 14 March 2016 - 09:28 PM
Update OP added boost and AFM.
Factory air fuel was off. Started to MAF scale, more datalogging to do however its not in the red anymore which is a good thing after 3" TBE and bigger interfooler
IMG-20160313-WA0000.jpeg 143.31KB
9 downloads
Toy's Garry
Address : 8/88 Seville Street
Fairfield East NSW 2161
PH : (02) 9755 9882
0 members, 0 guests, 0 anonymous users
