Need a new clutch
#1 Guest_Jesse_*
Posted 21 March 2011 - 06:28 PM
I would attempt it myself but I am staying at my sisters place and have no tools or place to do it and I need my car.
So throw up any suggestions if you have some.
Also, what kind of clutch should I be looking at, I was just thinking an Exedy OEM replacement? Any cheaper options, as a new engine/gearbox will be going in in the next couple of months, unless the clutch will suit a v3 gearbox?
Cheers Jesse
Edit: Also, any ideas on a good place to get a halfcut in Melbourne?
#2 Guest_Jesse_*
Posted 21 March 2011 - 09:23 PM
#3
Posted 21 March 2011 - 09:40 PM
they were cheapest i found when i went hunting back a few years ago.. just going OEM replacement? or something special?
Valeo clutches are pretty good, never get mentioned but they are OEM for most European cars and heaps of other makes.
short of this.. check repco.. i got my kit from them for only slightly more (it was a saturday when i needed it)
it was under $500 for my kit..
#4 Guest_Jesse_*
Posted 21 March 2011 - 09:45 PM
Only thing is, what clutch do I ask for?
Is it the same clutch as a Liberty or wrx?
#5
Posted 22 March 2011 - 06:26 AM
i would just be buying the standard clutch for the RX, its all the same part no afaik
#6 Guest_Jesse_*
Posted 22 March 2011 - 07:55 AM
#7
Posted 22 March 2011 - 11:30 AM
#8 Guest_Jesse_*
Posted 22 March 2011 - 11:42 AM
I found the clutch I need, same one as a WRX up to '05.
#9 Guest_Jesse_*
Posted 22 March 2011 - 12:51 PM
They are by far the cheapest I have come across. Repco wanted $750!!?!
Should I do anything else while I have the engine out etc when doing the clutch?
#10
Posted 22 March 2011 - 12:59 PM
#11 Guest_Jesse_*
Posted 22 March 2011 - 01:16 PM
With the flywheel bearing, is that the same as the spigot bearing and would that be the same a WRX one?
#12
Posted 22 March 2011 - 01:22 PM
its only 5MT yeah?
i would just be buying the standard clutch for the RX, its all the same part no afaik
MAKE SURE YOU GET A PULL TYPE CLUTCH , THE RX IS A PUSH TYPE.
GET CLUTCH to suit my99 WRX or EARLIER and you will be fine, 4 bolt 5 MT, Pull type clutch system.
Yeah $430 is for the whole kit. Where would I get a rear main for my engine? I assume I can't get one from Subaru?
With the flywheel bearing, is that the same as the spigot bearing and would that be the same a WRX one?
Rear main part number
806786040.
FJK-7123 is good, 'tis what I am running in mine.
#13
Posted 22 March 2011 - 01:25 PM
#14 Guest_Jesse_*
Posted 22 March 2011 - 01:40 PM
Brendan- More than half the places I rang wanted over $600 for the FJK-7123 which is just a standard replacement clutch.
#15
Posted 22 March 2011 - 01:53 PM
#16 Guest_Jesse_*
Posted 22 March 2011 - 02:01 PM
#17
Posted 22 March 2011 - 02:15 PM
Cheers Dylan, yeah made sure I got the pull type clutch. Got confirmation over on RSLC what clutch I needed. Thanks for the rear main part #. Should I just go to Subaru or any auto parts store?
Brendan- More than half the places I rang wanted over $600 for the FJK-7123 which is just a standard replacement clutch.
Try buying one with a Dual Mass Fly-Wheel LOL.. the "Dual" in the name stands for what happens to the price of clutch compared to a "single".
#18 Guest_Jesse_*
Posted 22 March 2011 - 02:53 PM
Dylan they want $44.10 for the rear main now
#19
Posted 22 March 2011 - 02:58 PM
Try and get trade price !
Up to you, you may not need to do it - better safe than sorry though I guess
#20
Posted 22 March 2011 - 03:00 PM
give them suabru part number, they are in preston.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users