
Aek's MY04 Forester XT
#161
Posted 04 February 2012 - 08:42 AM
http://www.ebay.com....6.c0.m270.l1313
And here is a DIY on install... You just need to get another globe holder and tap into the other globe or get a loom from another foz
http://ozfoz.com/for...hp?f=29&t=22040
#162
Posted 04 February 2012 - 08:50 AM
Not sure what postage is though
(null)
#163
Posted 04 February 2012 - 09:15 AM
They are knock offs, Chris. $320 for the knock offs or $290 (+postage) for the real deal.
Not sure what postage is though
(null)

#164
Posted 04 February 2012 - 05:16 PM
some better pics


#165
Posted 04 February 2012 - 06:10 PM
Get out of my thread.
#166
Posted 04 February 2012 - 07:05 PM
Brake callipers look so bright!
Considered blacking them?
#167
Posted 04 February 2012 - 09:13 PM
ouch! that's some pretty steep freight. wonder how the ebay ones are for quality??
What about IM?
#168
Posted 04 February 2012 - 10:38 PM
A us parcel forwarding joint might make it cheaper.
Brake callipers look so bright!
Considered blacking them?
Or maybe silver brakes with black logo's?
Subyclub, The place where random internet weirdos become good mates
#169
Posted 05 February 2012 - 12:40 AM
PITA to keep clean though? -but not too much hassle, really, if one is keen on itOr maybe silver brakes with black logo's?
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#170
Posted 06 February 2012 - 11:23 AM
Subyclub, The place where random internet weirdos become good mates
#171
Posted 06 February 2012 - 12:18 PM
zach has silver 4pots with rusted logos. i dont think ive seen him clean them, and they always look clean.Or maybe silver brakes with black logo's?
#172
Posted 06 February 2012 - 01:02 PM
Subyclub, The place where random internet weirdos become good mates
#174
Posted 06 February 2012 - 03:28 PM

OEM+
#175
Posted 06 February 2012 - 03:40 PM
Neeeeeds a CrossSports front end.
Theyre expensive even off IM unless u can get them cheaper

Maybe we should hit up jessestreeter.com
#176
Posted 06 February 2012 - 04:03 PM
Theyre expensive even off IM unless u can get them cheaper![]()
Maybe we should hit up jessestreeter.com
I has one.......
http://ozfoz.com/for...hp?f=38&t=28652
OEM+
#177
Posted 06 February 2012 - 04:13 PM
#178
Posted 06 February 2012 - 04:59 PM
Was in opposition to black onesI don't see how it'd be any worst then red to keep clean? No matter what colour they are they are gonna get dirt and brake dust on them,

Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#179
Posted 04 April 2012 - 09:46 PM
ended up taking the oil filter and sandwich plate off 4 times before finding out exactly why i kept dumping oil all over the floor
first, the sandwich plate needed a slight a recess on the engine side to accommodate nut of oem fitting as it was fouling by about 1mm, just enough to stop the o ring sealing.






second, after the sandwich plate clearance was corrected we found that aftermarket thread was about 3mm to long so had to trim that back to fit it all up correctly




so 4.5 hours later it was all FINALLY in, back together and working. thank



Will get better pics tomorrow.
#180
Posted 04 April 2012 - 09:53 PM
They do look good in though

I would have gone to the kitchen, collected a brown bag, dropped my dacks, pinched off a loaf in said bag, done up dacks, stickytaped bag, placed bag in envelope, and mailed it right to your face for being such a tool.
It's ok, sometimes when we herp, we also derp.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users