Hamish's GT Liberty
Started by hamish_023, May 14 2011 05:33 PM
28 replies to this topic
#21
Posted 12 July 2011 - 03:52 PM
Installed TCP Auto Exhaust. Happy with it but the left muffler sits at slightly the wrong angle hopefully will fix that somehow though
Also got some Zerosport engine bay bling
#22
Posted 12 July 2011 - 04:26 PM
Is nice Hamish, I like. .
OEM+
#23
Posted 12 July 2011 - 07:20 PM
Thanks Mark. Did you find your left muffler sat on a slight angle?
Supposably common problem with the sedans and it's an easy fix somehow
Supposably common problem with the sedans and it's an easy fix somehow
#24
Posted 12 July 2011 - 07:33 PM
Not with the STi's. The lhs is perfect, dead centre and straight in the cutout, The rhs is also dead straight, but slightly to the right. Apparently its a common thing with the TCP system. Their jig must be out a touch.
Easy fix is cut the inlet pipe just before it goes into the muffler, where its straight. Then rotate it til it sits level and weld back up. I had to do this with the HKS ones.
Easy fix is cut the inlet pipe just before it goes into the muffler, where its straight. Then rotate it til it sits level and weld back up. I had to do this with the HKS ones.
OEM+
#25
Posted 12 July 2011 - 07:37 PM
looks good mate. can't remember which brand they were but i seem to remember jim having this problem as well when he did his exhaust??
#26
Posted 12 July 2011 - 09:19 PM
Jim has TCP also Aek but large single tip styles.
OEM+
#27
Posted 13 July 2011 - 12:11 PM
Cheers, will take it to someone to get a fix.
Not a huge fan of the twinscroll's sound but may have a fix.
Not a huge fan of the twinscroll's sound but may have a fix.
#28
Posted 19 July 2011 - 04:27 PM
Twinscroll/equal length headers sound
The exhaust sounds a bit louder then it normally does as the car was under the carport. Pretty happy with them but the LH muffler sits on a angle which will need to be fixed as the hangers and bolts only slightly correct it.
Also applied some Opticoat to the exhaust so they are easy to clean
#29
Posted 19 July 2011 - 04:39 PM
Needs moar unequal headers.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users