103 replies to this topic

[93tzlegacy]

hey guys, just picked up an unloved and raped Outback, its in a pretty bad way, no motor, box, diff or loom, but plans are afoot to make her all better.
already have :
legacy garnish
rev B B4 RSK grille
GTB bonnet
GTB roof rails
r160 rear end ( fitted)
4.11 box
v3 STI shifter
manual tailshaft
exhaust
replacement rear diff bushes ( fitted)
complete RX interior from an 01 model
replacement LHR lower door pannel
01 rear harness ( to suit MY01 H6 wiring)
parts to come :
H6 engine
BC coilovers
18x9.5 wheels
stereo
pics:
%20<a%20%20data-cke-saved-href=












thanks ,Ben.

[CRUISN]

I look forward to the final result.

Not a fan of Rota's though..... (well you did say come at you. )

[aekOne]

Looks and sounds great Ben. Interested to see how this one turns out mate

Ps: updated you post with [img] codes for the pic

[Shiv]

Nice work Lance. I've always thought the EZ30D has been begging for a manual box!! And with the JDM tune, this thing must be reasonably fast....

I don't care if the rims are fake, I think they look great.

[93tzlegacy]

thanks guys, mark when you find some te37SL in 18x9.5 in 5x100 for $1040 delivered, ill take 10 sets
also planning a series 2 facelift, got a 2003 b4 in white coming from japan so ill have the headlight and bonnet sorted, just need a series 2 outback bumper .

[Morgan]

OUTBACK!!!

Nice one Ben. Looking forward to updates

[Shiv]

You're welcome to take my series 2 bar if you want. Its got a crack on it and will be replaced in the next 2-months. If you're handy enough, you might be able to get it to an acceptable standard but I think its beyond repair.

[93tzlegacy]

thanks mate , but looks like it has a nudge bar? hopefully genuine bar skin wont cost to much ( and the reo and fog lights are the same from s1 - 2? )

[Shiv]

I'm keeping the nudge bar. Its easily disconnected by four screws.

Reo and foggies are the same.

Series2 OBK bars are damn hard to get.

[Adam]

Awesome car is awesome!

[Alex]

Nice one Benny!

[bobbyjimmy]

also threw on a legacy tail gate garnish as mine was leaking.

The Legacy one will still leak - you have to seal the upper edge where the lens meets the backing with silastic/urethane.

Looks good - will be better after you lower/dump it.
How low are you going?

[simon]

looks good, watching this build with interest.....

[FR34KO]

saweeeeet! love this colour combo. who cares if they're rota's, they look good!

[93tzlegacy]

As low as possible, still not sure about the 2 tone but it looks better than having all the moldings stripped off. Just need to get it running 100% and I'll be laughing.

[Morgan]

Two-tone matches the rims!

The 99 model trims is more of a gold colour I think while the Rev DE is slightly more silver?





Would look p0rn colour coded though

I guess if you go a later Rev front end, you will have to get it sprayed anyway because of the slight colour change...

[Marv]

Needs a 13B and an 8/71 and a polished crank and hello kitty stickers and three thousand neons.



Good to see it saved, Ben. Get some pipes on it - they sound AWESOME.

[Evil_VZ-T]

Nice work Lance. I've always thought the EZ30D has been begging for a manual box!! And with the JDM tune, this thing must be reasonably fast....

I don't care if the rims are fake, I think they look great.

Lol Fail shiv my man..

Im VZ, Benny boy is TZ

Ben, that outback is going to be 'ing pimp!

Needs a 13B and an 8/71 and a polished crank and hello kitty stickers and three thousand neons.

Like this?

[jiggabite]

Can't wait to see it dropped, will look baller with those wheels and offset.

[Steveee]

Thats tits.

Rear wing will do well!