23 replies to this topic

[U-Shell]

Do they have the plug, but just no lights?


Sent from my iPhone using Tapatalk

 

Theres nothing wired behind the doors for the puddle lights. I've had the door trims off multiple times and never found anything. If you have the lights, you could just run the wires back into the cabin (have fun getting through the that rubber boot thing) and just twist/solder it into the two connectors I put in under the steering column for the footwell lights. Unless the wires are already run into the main door harness and its just a case of splicing into them? I'll have a look at the workshop manual when I get time.

[Riggs]

 
Theres nothing wired behind the doors for the puddle lights. I've had the door trims off multiple times and never found anything. If you have the lights, you could just run the wires back into the cabin (have fun getting through the that rubber boot thing) and just twist/solder it into the two connectors I put in under the steering column for the footwell lights. Unless the wires are already run into the main door harness and its just a case of splicing into them? I'll have a look at the workshop manual when I get time.

Yeah I had a look today, I clipped in the lights and just run the wires to the footwells tomorrow.
Arggggh wires through that rubber makes me mad


Sent from my iPhone using Tapatalk

[Adam]

Pull door stopper thing pin out, move it out of the way, pull both ends of the rubber off then use one of these

 

 

Then struggle getting the rubber back on for a bit

[BE4ORE]

Curious about actually... Wouldn't mind doing this foot well led!