Just Plasti Dip my outback with Matte clear, The outback is standard white when I started. The outcome looks like satin white now what do you think ?
Outback getting prepped..
Outback with Matte Clear
Yay or Nay...?
Posted 19 October 2013 - 11:36 PM
Hi,
Nice work for getting in there and doing it, but for me I have no idea why you've done it.
Cheers,
Nik
Posted 19 October 2013 - 11:41 PM
The out had a lot of swirl mark all over it, as it's 13 years old as the previous owner most probably used steel wool to clean the car hahaha. also wanted the Matte look and this was the cheapest was to do so.
Posted 19 October 2013 - 11:48 PM
Hi,
It looks like you've done a great job on it, and if it's your desired result, even better!
Certainly unique! Enjoy.
Cheers,
Nik
Posted 20 October 2013 - 06:26 AM
Posted 20 October 2013 - 07:31 AM
Im with BOSSKONG
Looks great now but potentially could look like crap in the future.
If it is full of swirl marks, a good cut and polish will fix that as it looks like a clean and straight car.
Props for thinking outside the square though.
If I told you I was a compulsive liar, would you believe me?
Posted 20 October 2013 - 01:37 PM
RX25SE, BOSSKONG, if you put down enough layers the Plasti Dip comes of with ease, More then 5 coats would be fine. Thought I'll test the stuff out, because i've got coats on should be easy to take off once it starts looking crap.
Posted 20 October 2013 - 03:21 PM
Posted 20 October 2013 - 04:34 PM
Posted 20 October 2013 - 05:10 PM
Photo's taken at Glebe skatepark today.
From this angle the texture in the paint can't be seen. I'm really liking how the Matte clear turned out on the bottom half on the outback
Here is a before picture
From this angle, if you look at the front door you can see texture coming out.
BOSSKONG, it Pasti Dip sold at autobarn.
Posted 20 October 2013 - 05:30 PM
Posted 20 October 2013 - 05:59 PM
Posted 20 October 2013 - 06:07 PM
Did you do the whole car or just the bottom half?
Matte white is getting pretty common now
Did the the bottom half of the car at this point just testing it out, got the roof to go yet. but now thinking taking it off the white areas and leaving the Gold/Grey bottom half of the car.
Posted 20 October 2013 - 09:44 PM
Posted 20 October 2013 - 10:52 PM
Now that I've driven it under different lighting the bonnet has a lot of texture all over it. anyone know how to fix it, my first time spraying so any input on how to rectify it would be great.
That is just what Plasti Dip from a spray can does on large areas. You can make it less obvious by doing a LOT of coats. My bonnet and roof have about 12 I think.
Posted 21 October 2013 - 09:17 AM
That is just what Plasti Dip from a spray can does on large areas. You can make it less obvious by doing a LOT of coats. My bonnet and roof have about 12 I think.
How is it holding up for you? Starting to look weathered or anything like that??
Posted 21 October 2013 - 09:52 AM
Posted 21 October 2013 - 10:36 AM
Most of the photos aren't working! They've been moved or deleted on photobucket
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
0 members, 0 guests, 0 anonymous users