Lance's STi powered Legacy
#1
Posted 12 August 2008 - 10:49 PM
As most of you might know, This is my 91 Liberty which started its life as a legacy VZ over in Japan. it has been converted to Turbo AWD and is one of the nicest legacy's i have seen.
Engine Modifications
1994 STI RA motor
Closed deck
Factory forged pistons
STI Ported Inlet and Exhaust manifold
STI ported heads
Custom Front Mount Intercooler
AM Auto 3" Split Dump pipe
3" exhaust
Haltech E8
3Bar MAP Sensor
Rotated IHI VF23 P20 Turbo
Turbosmart Type 1 BOV
Turbosmart Boost tee
K&N Pod
Extreme heavy duty Clutch
Bosch HEC 716 Coils x 4
Top gun leads
My05 WRX 4.44 ratio gearbox with PPG straight cut 1-4 and billet selector forks 1-2
Interior
SAAS Bucket Seats
Full RS Liberty Trim & Dash
JVC DVD/MP3 headunit
7" Screen
Response 6"splits
Resonse 6" Rear speakers
Kevlar 12"sub
Exhaust temp & Boost gauge
Legacy MOMO Wheel
SubDataScan Digital dash
Exterior
JDM Legacy grill
AU racing 229 18" rims
RS legacy front bar
JDM legacy rear garnish
Chrome door handles and trim
Suspension
GC8 Struts
King "low" springs
GC8 Impreza strut tops
Whiteline Adj.front strut brace
Whiteline 22mm Adj. Rear Sway Bar
Whiteline S/B Rear Links and Bushes
Slotted front rotors
Future mods
Parallel Fuel rails *done*
Aftermarket Adjustable FPR *done*
440cc/550cc Injectors *done*
1>4 Straight Cut gear set *done*
Haltech (waiting under bed) *done*
ALK
roll centre kit
lower ball joints
Front sway bar
Over the past few months i have basically fixed up all the broken or dodgy stuff and neatened it up. I had a problem with the car cutting out randomly and running like poop. Which i found out was a loose connection to the IACV plug and the AFM plug. these were replaced and all was good. (big thanks to techworkz)
#2
Posted 12 August 2008 - 11:07 PM
#3
Posted 12 August 2008 - 11:22 PM
#5
Posted 13 August 2008 - 08:47 AM
#6
Posted 13 August 2008 - 02:52 PM
is one of the nicest legacy's i have seen.
I agree. Its one of the cleanest looking Gen1 sedans around.
Have you decided on changing the rims or the color? I do like the gold though.
OEM+
#7
Posted 13 August 2008 - 03:01 PM
have you done the coil conversion yet?
Ha. Look at you talking it up after it took you +6months to listen to me and finally f**k**g do them.
Spend less time kissing teenage boys & more time working on your boonger!
#8
Posted 13 August 2008 - 03:06 PM
Never forget seeing this car light up all 4 on the freeway in the wet. That was back in the days of Dave's ownership when Mark/Billsy/Hendo came up to go to the drags and it got rained out at 5pm that afternoon... hahahaa... suckers.
Ha. Look at you talking it up after it took you +6months to listen to me and finally f**k**g do them.
Spend less time kissing teenage boys & more time working on your boonger!
HAHAHAHA.
Hey, it wasn't 6+ months you f**k**g halfcast!
But yes, I will talk them up because they are a f**k**g good idea.
HEC716's "FTW" as you would say, Iain.
xoxoo
#9
Posted 13 August 2008 - 03:08 PM
#10
Posted 13 August 2008 - 07:29 PM
Looking good mate! I just got a set of those wheels
good choice of rims
i also have the same
we shall make a club
#11
Posted 13 August 2008 - 07:43 PM
Just Married
#12
Posted 15 August 2008 - 08:48 PM
#13
Posted 17 August 2008 - 10:14 AM
Top example of a quality conversion - what all NA driving members should aspire to!!
Now evil_tz, DONT CRASH IT!!
Haha thanks mate. Ill try not to.
TZ?..... VZ:D i dont know what the difference is though.
I just replaced the knock sensor on friday. and what a difference! The car runs beautifully and due to it running more timing. I recommend it to anyone driving a RS
#14
Posted 17 August 2008 - 11:58 AM
Haha thanks mate. Ill try not to.
TZ?..... VZ:D i dont know what the difference is though.
I just replaced the knock sensor on friday. and what a difference! The car runs beautifully and due to it running more timing. I recommend it to anyone driving a RS who has a rooted knock sensor.
Edited for correctness.
#15
Posted 17 August 2008 - 07:56 PM
#16
Posted 17 August 2008 - 09:14 PM
#17
Posted 17 August 2008 - 09:32 PM
#18
Posted 17 August 2008 - 10:38 PM
#19 Guest_SubaruJunkie_*
Posted 19 August 2008 - 08:54 PM
#20
Posted 21 August 2008 - 10:39 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users