Sup.
Cam, if you are out there, fixed idler pulley bolt on a H6- LH or RH thread???
cubt of a thing is seized.
Posted 28 July 2014 - 08:41 PM
Sup.
Cam, if you are out there, fixed idler pulley bolt on a H6- LH or RH thread???
cubt of a thing is seized.
If I told you I was a compulsive liar, would you believe me?
Posted 28 July 2014 - 08:48 PM
Mmmmmmmmmmmm good dinner
Ugh i could ramble on for forking days about this stuff.
Posted 28 July 2014 - 08:56 PM
That's easy, just a screwdriver.
Be surprised at how many dumbarses just tighten the cable.
Posted 28 July 2014 - 08:57 PM
Posted 28 July 2014 - 09:01 PM
Ugh i could ramble on for forking days about this stuff.
Posted 28 July 2014 - 09:03 PM
Set the drums then the cable
And yet people still adjust the cable until it has stretched and all kinds of forked.
Posted 28 July 2014 - 09:03 PM
Ugh i could ramble on for forking days about this stuff.
Posted 28 July 2014 - 09:03 PM
Fark Shaz, Manly 1st on the ladder, Souths 2nd.
Posted 28 July 2014 - 09:05 PM
And yet people still adjust the cable until it has stretched and all kinds of forked.
Posted 28 July 2014 - 09:09 PM
yeah but you actually know what the fork you are doing Rob hehehe.
Posted 28 July 2014 - 09:17 PM
Posted 28 July 2014 - 09:18 PM
You just pour petrol on the rear wheels and set fire to them Radam.
Posted 28 July 2014 - 09:21 PM
Posted 28 July 2014 - 09:21 PM
Posted 28 July 2014 - 09:25 PM
I put that carby on that I got from the wreckers to check how it looked, cleaned it up first.
Thing was just flooding like a mofo, float level was forking way off, filled the intake manifold with like 5mm of fuel after not very long at all, dried that out and took the plugs out to clear and more fuel, set the float level so now it sits about half way on the glass on the side of the bowl.
It Versk!!! Only issue is now that while it is in park the actuator that connects via vacuum line to the EGR is holding the choke butterfly full open at idle and makes it rev hunt, disconnected that and just plugged it up for now and it idles ok now.
Will about with that more over the weekend when I can be forked hahaha.
Buy better suspension Radam.
I am still on my original shocks
Posted 28 July 2014 - 09:27 PM
Posted 28 July 2014 - 09:28 PM
I just haven't stopped driving for the last 3 years
I just like to re do heater cores
I just like to re do up pipes
I just like to re do suspension, 4 times.
I'm just a useless cubt that needs to learn to give up
Posted 28 July 2014 - 09:28 PM
Posted 28 July 2014 - 09:30 PM
Posted 28 July 2014 - 09:33 PM
I like to redo suspension and timing belts/oil seals and water pumps
Ugh i could ramble on for forking days about this stuff.
Tech: The basics →
Electrical/Electronics →
ECU reset & test mode not workingStarted by Guest_KONG_* , 25 Feb 2016 ![]() |
|
![]()
|
||
Tech: The basics →
Do-It-Yourself Guides →
DIY: How to raise your number plateStarted by Guest_KONG_* , 16 Apr 2015 ![]() |
|
![]() |
||
Suby Club Community →
General Discussion →
Whitekong is busted & I'm stranded in Avenel Victoria.Started by Guest_KONG_* , 21 Feb 2015 ![]() |
|
![]()
|
0 members, 0 guests, 0 anonymous users